Abstract:Most of dyes cause various environmental and health problems due to their toxic, mutagenic, and even carcinogenic properties. Therefore, several treatment methods are used to remove dyes from wastewater. Adsorption is one of the most preferred methods due to its easy application and high efficiency. The aim of this study is to prepare and characterize KOH-activated pine cone (APC) biochar and use it as adsorbent for removal of anionic diazo dye, Congo red (CR) from aqueous solution. The various operating parameters such as pH, contact time, temperature, initial dye concentration, and adsorbent dosage are optimized in batch adsorption system. Experimental results showed that the prepared APC biochar has a surface area of 1714.5 m2/g and was achieved 94.62% CR removal efficiency at an adsorbent dosage of 2┬Āg/L. The Freundlich, Langmuir, and Temkin adsorption models were used for the mathematical description of the adsorption equilibrium. Experimental data showed the best compatibility with the Freundlich isotherm. Batch adsorption models, based on the assumption of the pseudo first-order, pseudo second-order, and intra particle diffusion mechanisms, were applied to examine the kinetics of the adsorption. Kinetic data fitted the pseudo second-order kinetic model. Calculated thermodynamic parameters indicated the spontaneous, endothermic, and the increased randomness nature of CR adsorption. Structural and morphological changes of APC biochar after adsorption process were determined by using Fourier-transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM) analysis. The prediction of the CR adsorption capacity of the APC biochar using artificial neural network (ANN) algorithm was modeled. For this purpose, many different ANN models have been developed. Among them, ANN10 gave the best results. According to ANN10 results, root-mean-squared error (RMSE), mean bias error (MBE), mean absolute error (MAE), and correlation coefficient (R2) were estimated as 0.770, 0.310, 0.037, and 0.999, respectively. Consequently, the prediction results showed well agreement with experimental results.

Adsorption of anionic wood dyes on KOH-activated carbons from Pinus radiata sawdust

Preparation of activated carbon from pine (Pinus radiata) sawdust by chemical activation with zinc chloride for wood dye adsorption

Process Parameters Optimization, Characterization, and Application of KOH-Activated Norway Spruce Bark Graphitic Biochars for Efficient Azo Dye Adsorption

Investigation of effectiveness of pine cone biochar activated with KOH for methyl orange adsorption and CO2 capture

Adsorption of Anionic and Cationic Dyes on Activated Carbon Prepared from Oak Cupules: Kinetics and Thermodynamics Studies

Elimination of indigo carmine in water by Pinus patula biochar: Adsorption process optimization, kinetics and isotherms

Removal of Methylene Blue and Methyl Red from Aqueous Solutions Using Activated Carbons Obtained by Chemical Activation of Caraway Seed

Utilization of Pinus kesiya and Schima wallichii Biomass-Derived Activated Carbon for Methylene Blue Removal: Adsorption Performance and Mechanistic Insights

Sorghum-Waste-Derived High-Surface Area KOH-Activated Porous Carbon for Highly Efficient Methylene Blue and Pb(II) Removal.

Adsorptive Behavior of Colored Impurities Generated in Aromatic Hydrocarbon Oxidation Process on Activated Carbons

Dye Removal of Activated Carbons Prepared from NaOH-pretreated Rice Husks by Low-Temperature Solution-Processed Carbonization and H3PO4 Activation

Spherical Lignin-Derived Activated Carbons for the Adsorption of Phenol from Aqueous Media

Adsorption of congo red dye from aqueous solutions by prepared activated carbon with oxygen-containing functional groups and its regeneration

Preparation and Characterization of Activated Carbon from the Cones of Iranian Pine Trees (Pinus eldarica) by Chemical Activation with H3PO4 and Its Application for Removal of Sodium Dodecylbenzene Sulfonate Removal from Aqueous Solution

Enhanced biobased carbon materials made from softwood bark via a steam explosion preprocessing step for reactive orange 16 dye adsorption

Removal of phenol by lignin-based activated carbon as an efficient adsorbent for adsorption of phenolic wastewater

3D Hierarchical Porous Activated Carbon Derived from Bamboo and Its Application for Textile Dye Removal: Kinetics, Isotherms, and Thermodynamic Studies

Adsorption of Organic Compounds on Adsorbents Obtained with the Use of Microwave Heating

Adsorption of Congo red from aqueous solution onto KOH-activated biochar produced via pyrolysis of pine cone and modeling of the process using artificial neural network

Adsorption of congo red and methylene blue dyes on an ashitaba waste and a walnut shell-based activated carbon from aqueous solutions: Experiments, characterization and physical interpretations

Synthesis of activated carbon from cherry tree waste and its application in removing cationic red 14 dye from aqueous environments