Abstract:The research purpose of this work is to examine the adsorption interaction of synthetic dyes, such as methyl blue (MeB) and methyl orange (MeO), with the commercial activated carbon (CAC) (001) surface, in various mediums. Molecular dynamic (MD) simulations and density functional theory (DFT) calculations were used to explore the adsorption mechanism of these dyes on the CAC (001) surface. Experimental analysis is very suitable for understanding adsorption, but they are commonly expensive and time-consuming. With the improvement of computer hardware and software, DFT and MD simulation methods in recent times have become fast and powerful tools for predicting dye removal and understanding their adsorption mechanisms. The experimental results showed that the removal of both dyes followed the Langmuir isotherm, and the R 2 correlation coefficient values for MeO and MeB dyes were 0.993 and 0.988 respectively. The maximum adsorption capabilities for MeO and MeB dyes were 229.89 and 312.39 mg.g −1 , respectively. DFT obtained results showed that the MeB dye is more reactive than the MeO dye and would have a better capacity for adsorption than the MeO molecule. The comparative investigation based on low-energy electronic structures revealed that the influence of molecular structure on the electron donating/accepting ability determines the trend of adsorption potentials. MD simulation was used to look into the most suitable adsorption configurations of MeB and MeO molecules. The MD simulation-calculated adsorption energies demonstrated that the CAC (001) surface had a strong affinity for the cationic dye in a basic medium and high sensitivity to interactions with the anionic dye in an acidic solution. The outcomes demonstrated that dyes formed covalent connections with functional groups and C atoms of studied adsorbent to be better adsorbed on the CAC surface. Theoretical concepts from this work could serve as a reference for researchers looking into the usage of CAC adsorbent in the treatment of water contamination. Theoretically, computational modeling allowed for the confirmation of experimental findings and the identification of the optimal azo dye adsorption configuration on the employed activated carbon.

Adsorption of congo red and methylene blue dyes on an ashitaba waste and a walnut shell-based activated carbon from aqueous solutions: Experiments, characterization and physical interpretations

Adsorption of Congo Red and Methylene Blue onto Nanopore-Structured Ashitaba Waste and Walnut Shell-Based Activated Carbons: Statistical Thermodynamic Investigations, Pore Size and Site Energy Distribution Studies

Dye adsorption properties of carbonized sludge and its application for treating dyeing wastewater

Adsorption of congo red dye from aqueous solutions by prepared activated carbon with oxygen-containing functional groups and its regeneration

Adsorption enhancement of Congo red dye from wastewater based on edamame shell originated activated carbon by the cations: Experimental and theoretical studies

Congo red adsorption on shell powder and chitosan-coated shell powder biosorbents: experiments and theoretical calculation

Adsorption of Congo Red from Aqueous Solution Onto Shrimp Shell Powder

Removal of methylene blue from coloured effluents by adsorption onto SBA-15

Study On The Adsorption Of Dyes Using Diatomite And Activated Carbon

Preparation of Chitin with Different Degrees of Deacetylation from Crab Shells Waste and Its Application in the Removal of Congo Red

Isotherms, kinetics and thermodynamic mechanism of methylene blue dye adsorption on synthesized activated carbon

Recent advances in removal of Congo Red dye by adsorption using an industrial waste

Removal of acidic dyes; acid yellow 25 and acid red 4 from wastewater by degassed activated carbon

Experimental, DFT and MD simulation combined studies for the competitive adsorption of anionic and cationic dyes on activated carbon in an aqueous medium

ZnCl<sub>2</sub>-activated carbon from soybean dregs as a high efficiency adsorbent for cationic dye removal: isotherm, kinetic, and thermodynamic studies

Adsorption Isotherms and Kinetic Studies of Congo-Red Removal from Waste Water Using Activated Carbon Prepared from Jujube Seed

Design, Synthesis and Adsorption Evaluation of Bio-Based Lignin/Chitosan Beads for Congo Red Removal

Experimental Design, Equilibrium Modeling and Kinetic Studies on the Adsorption of Methylene Blue by Adsorbent: Activated Carbon from Durian Shell Waste

Adsorption experiments and mechanisms of methylene blue on activated carbon from garden waste via deep eutectic solvents coupling KOH activation

Adsorptive removal of cationic methylene blue and anionic Congo red dyes using wet-torrefied microalgal biochar: Equilibrium, kinetic and mechanism modeling

Research on The Adsorptive Propeties of Attapulgite Activated Carbon Composite Material to Congo Red