Abstract:The current work illustrates the physical activation of raw charcoal to produce activated carbon (AC) at low temperatures (300 and 500 °C). Prepared ACs are tested for Methylene blue (MB) adsorption experiments at various adsorption conditions (e.g., pH, temperature) and discussed efficiency, kinetics, isotherm models, and adsorption mechanism to determine the optimal adsorption conditions for the removal of MB dye. The results show that the prepared ACs (AC1, AC2 at 300 and 500 °C) efficiently absorb MB and obtain removal efficiency of ∼100 and 83% in 1 h, respectively. When the pseudo-first-order and pseudo-second-order adsorption kinematic models are used to test the adsorption data, the result fits the pseudo-first-order model better. The Freundlich and Langmuir adsorption isotherms are employed to model the isotherm data to get the maximum adsorption capacity (MAC). The MAC for AC1 and AC2 is found to be 39.14 and 40.98 mg/g, respectively. Additionally, MB adsorption has been analyzed using the Temkin and Dubinin–Radushkevich isotherm models, along with the inter-particle diffusion model. The Dubinin–Radushkevich model suggests that MB adsorption is a physical absorption process. The Temkin model showed that the Temkin constant (B) values are positive indicating that the adsorption is exothermic. The inter-particle diffusion model revealed that AC2 displays greater adsorption kinetics consistency due to its larger pore diameter. The results reveal that the Langmuir model captured the data better, demonstrating that monolayer adsorption dominated the absorption process. Additionally, prepared ACs are examined for reuse, and exhibit three cycles of recyclability. As a result, ACs made from oak wood charcoal are an easy affordable way to get rid of MB dye.

ZnCl<sub>2</sub>-activated carbon from soybean dregs as a high efficiency adsorbent for cationic dye removal: isotherm, kinetic, and thermodynamic studies

Production of Mesoporous Activated Carbon from Tea Fruit Peel Residues and Its Evaluation of Methylene Blue Removal from Aqueous Solutions

Dye adsorption properties of carbonized sludge and its application for treating dyeing wastewater

Removal of methylene blue from coloured effluents by adsorption onto SBA-15

Adsorption of Methylene Blue Onto Activated Carbon Produced from Tea (camellia Sinensis L.) Seed Shells: Kinetics, Equilibrium, and Thermodynamics Studies

Enhancing methylene blue removal: synthesis, characterization, and performance evaluation of chemically activated carbon adsorbents

Application of a Bio-waste Einkorn (Triticum monococcum L.) Husks Adsorbent for Removal of Metanil Yellow and Methylene Blue from Aqueous Media with Equilibrium, Kinetic, and Thermodynamic Studies

Efficient Removal of Methylene Blue from Aqueous Solutions Using a High Specific Surface Area Porous Carbon Derived from Soybean Dreg

Study On The Adsorption Of Dyes Using Diatomite And Activated Carbon

Application of Optimization Response Surface for the Adsorption of Methylene Blue Dye onto Zinc-coated Activated Carbon

Synthesis and characterization of modified activated carbon (MgO/AC) for methylene blue adsorption: optimization, equilibrium isotherm and kinetic studies

Activated carbon derived from sugarcane and modified with natural zeolite for efficient adsorption of methylene blue dye: experimentally and theoretically approaches

Adsorption of Methylene Blue in Water onto Activated Carbon by Surfactant Modification

Enhanced adsorption performance of activated carbon prepared from peanut shell for the adsorption of dyes from aqueous solution

Methylene blue dye adsorption onto activated carbon developed from Calicotome villosa via H3PO4 activation

Porous ZnCl2-Activated Carbon from Shaddock Peel: Methylene Blue Adsorption Behavior

Preparation of a highly functionalized activated carbon from waste third-monomer pressure filter liquid for removal of methylene blue in aqueous solution

Development of activated carbon from Eichhornia Crassipes via chemical activation and its application to remove a synthetic dye

Low temperature physical activation of raw charcoal for excellent dye adsorption kinetics

Modeling and thermodynamics of methylene blue and acid blue 80 adsorption onto potato residue based activated carbon

Experimental Design, Equilibrium Modeling and Kinetic Studies on the Adsorption of Methylene Blue by Adsorbent: Activated Carbon from Durian Shell Waste