Abstract:Herein, mesoporous activated carbon (AC) was prepared through potassium hydroxide (KOH) activation of hydrochar derived from the hydrothermal carbonization (HTC) of chickpea stem (CS), and successfully applied to remove methylene blue (MB) dye from aqueous solutions in a batch system. The HTC-CSAC was prepared depending on different impregnation ratios (hydrochar:KOH, 50–150%), impregnation times (12–48 h), activation temperatures (400–600<math>°C</math>) and activation times (30–60 min). To define HTC-CSAC, various analytical techniques such as iodine adsorption number (IAN), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and Brunauer–Emmett–Teller (BET) were used. In the removal process of MB by the best HTC-CSAC with a high IAN of 887 mg g−1 obtained under conditions including impregnation ratio of 70%, activation time of 45 min, activation temperature of 600<math>°C</math> and impregnation time of 24 h, the effects of adsorption parameters such as pH factor (2–10), adsorbent dosage (50–100 mg), initial MB concentration (40–80 mg/L) and contact time (90–180 min) were studied. Besides, a detailed evaluation of the adsorption mechanism for the removal of MB by HTC-CSAC was performed. The Langmuir model indicated the best isotherm data correlation, with a maximum monolayer adsorption capacity (Qmax) of 96.15 mg g−1. The adsorption isotherm findings demonstrated that the MB removal process is feasible, and that this process takes place through the physical interaction mechanism. Additionally, the HTC-CSAC adsorbent exhibited a high regeneration and reuse performance in MB removal. After five consecutive adsorption-desorption cycles, HTC-CSAC maintained the reuse efficiency of 77.86%. As a result, the prepared HTC-CSAC with a high BET surface area of 455 m2 g−1 and an average pore diameter of 105 Å could be recommended as a promising and reusable adsorbent in the treatment of synthetic dyes in wastewaters.Graphical Mesoporous activated carbon (AC) was prepared through KOH activation of hydrochar derived via hydrothermal carbonization (HTC) of chickpea stem (CS).The BET surface area and average pore diameter of HTC-CSAC were 455 m2 g−1 and 105 Å, respectively.The removal of MB dye by the best HTC-CSAC with a high IAN of 887 mg g−1, was studied using RSM optimization.The adsorption isotherm findings demonstrated that the MB removal process is feasible, and that this process takes place through the physical interaction mechanism.The HTC-CSAC adsorbent exhibited a high regeneration and reuse performance in MB removal.

Application of a Bio-waste Einkorn (Triticum monococcum L.) Husks Adsorbent for Removal of Metanil Yellow and Methylene Blue from Aqueous Media with Equilibrium, Kinetic, and Thermodynamic Studies

Application of Optimization Response Surface for the Adsorption of Methylene Blue Dye onto Zinc-coated Activated Carbon

A New Biosource for Synthesis of Activated Carbon and Its Potential Use for Removal of Methylene Blue and Eriochrome Black T from Aqueous Solutions

Production of Mesoporous Activated Carbon from Tea Fruit Peel Residues and Its Evaluation of Methylene Blue Removal from Aqueous Solutions

Adsorption of Methylene Blue Onto Activated Carbon Produced from Tea (camellia Sinensis L.) Seed Shells: Kinetics, Equilibrium, and Thermodynamics Studies

ZnCl<sub>2</sub>-activated carbon from soybean dregs as a high efficiency adsorbent for cationic dye removal: isotherm, kinetic, and thermodynamic studies

Synthesis and characterization of modified activated carbon (MgO/AC) for methylene blue adsorption: optimization, equilibrium isotherm and kinetic studies

Study On The Adsorption Of Dyes Using Diatomite And Activated Carbon

Removal of Methylene Blue and Methyl Red from Aqueous Solutions Using Activated Carbons Obtained by Chemical Activation of Caraway Seed

Equilibrium, Kinetic and Thermodynamic Studies on Methylene Blue Adsorption by Konjac Glucomannan/Activated Carbon Aerogel

Enhanced adsorption performance of activated carbon prepared from peanut shell for the adsorption of dyes from aqueous solution

Removal of Dyes from Aqueous Solutions Using Activated Carbon Prepared from Rice Husk Residue

Characteristics and Adsorption of Methylene Blue on Activated Carbon Derived from Enzyme-Pretreated Camellia Oleifera Shells

Methylene blue dye adsorption onto activated carbon developed from Calicotome villosa via H3PO4 activation

Adsorption Characteristics of Methylene Blue on Activated Carbon from Rice Husk Ash by Chemical-Thermal Process

Adsorption of Anionic and Cationic Dyes on Activated Carbon Prepared from Oak Cupules: Kinetics and Thermodynamics Studies

Preparation and characterization of activated carbon from hydrochar by hydrothermal carbonization of chickpea stem: an application in methylene blue removal by RSM optimization

High adsorption capacity of phenol and methylene blue using activated carbon derived from lignocellulosic agriculture wastes

Activated carbon derived from sugarcane and modified with natural zeolite for efficient adsorption of methylene blue dye: experimentally and theoretically approaches

Development of activated carbon from Eichhornia Crassipes via chemical activation and its application to remove a synthetic dye

Characterization and Adsorption Mechanism of Methylene Blue Dye by Mesoporous Activated Carbon Prepared from Rice Husks