Abstract:In recent years, the application of activated carbons derived from waste biomass precursors with well-developed pores and extended specific surface area has evinced considerable interest for environmental contaminant abatement. Microwave irradiation is a promising energy-efficient and environmentally significant technique for activated carbon preparation. The present work intends to accentuate the utilization of activated carbon based on sustainable and plentifully available waste biomass — goat droppings — and its subsequent usage in aquatic environmental remediation. In the present article, the efficiency of goat droppings activated carbon (GDAC), prepared via energy-efficient microwave irradiation using H 3 PO 4 as chemical activator, for the removal of coomassie brilliant blue G 250 (CBB) from aqueous solution, has been examined. The operating variables influencing the adsorption process are optimized using response surface methodology (RSM) through central composite design (CCD). The optimum conditions for CBB adsorption are contact time (100 min), pH (3.98), initial CBB concentration (80 mg/L), GDAC dose (0.35 g/L), and temperature (333 K). The interaction of process variables is evaluated through statistical analysis of the developed regression model in CCD and three-dimensional response surface plots. The Freundlich model efficiently elucidates the experimental data, which amounts to the adsorption of CBB onto heterogeneous GDAC surface. The monolayer adsorption capacity (270.3 mg/g), evaluated from the Langmuir model, establishes the high removal efficiency of GDAC in comparison to earlier reported adsorbents proving its superior performance. The adsorption appropriately follows pseudo-second-order kinetics. The negative Δ G o (4.20–5.20 kJ/mol at 60 mg/L; 3.57–4.15 kJ/mol at 70 mg/L) and Δ H o (5.93 kJ/mol at 60 mg/L; 2.29 kJ/mol at 70 mg/L) confirm the spontaneous and endothermic and physical nature, respectively, of the adsorption process. The study demonstrates that the present adsorbent can be proficiently employed in the treatment of dye-based water.

Enhanced adsorption performance of activated carbon prepared from peanut shell for the adsorption of dyes from aqueous solution

A novel activated carbon material from peanut shells for the removal of methyl orange and methylene blue dyes from wastewater: kinetics, isotherms and mechanism

Synthesis of activated carbon from peanut shell as dye adsorbents for wastewater treatment

Experimental Design, Equilibrium Modeling and Kinetic Studies on the Adsorption of Methylene Blue by Adsorbent: Activated Carbon from Durian Shell Waste

Preparation of a highly functionalized activated carbon from waste third-monomer pressure filter liquid for removal of methylene blue in aqueous solution

Characteristics and Adsorption of Methylene Blue on Activated Carbon Derived from Enzyme-Pretreated Camellia Oleifera Shells

ZnCl<sub>2</sub>-activated carbon from soybean dregs as a high efficiency adsorbent for cationic dye removal: isotherm, kinetic, and thermodynamic studies

Production of Mesoporous Activated Carbon from Tea Fruit Peel Residues and Its Evaluation of Methylene Blue Removal from Aqueous Solutions

Application of a Bio-waste Einkorn (Triticum monococcum L.) Husks Adsorbent for Removal of Metanil Yellow and Methylene Blue from Aqueous Media with Equilibrium, Kinetic, and Thermodynamic Studies

Enhancing methylene blue removal: synthesis, characterization, and performance evaluation of chemically activated carbon adsorbents

Methylene blue dye adsorption onto activated carbon developed from Calicotome villosa via H3PO4 activation

A New Biosource for Synthesis of Activated Carbon and Its Potential Use for Removal of Methylene Blue and Eriochrome Black T from Aqueous Solutions

Low temperature physical activation of raw charcoal for excellent dye adsorption kinetics

Inclusive study of peanut shells derived activated carbon as an adsorbent for removal of lead and methylene blue from water

Synthesis and characterization of modified activated carbon (MgO/AC) for methylene blue adsorption: optimization, equilibrium isotherm and kinetic studies

Activated carbon derived from sugarcane and modified with natural zeolite for efficient adsorption of methylene blue dye: experimentally and theoretically approaches

Removal of Dyes from Aqueous Solutions Using Activated Carbon Prepared from Rice Husk Residue

Adsorption enhancement of Congo red dye from wastewater based on edamame shell originated activated carbon by the cations: Experimental and theoretical studies

Effect of Acid and Hydrothermal Treatments on the Dye Adsorption Properties of Biomass-Derived Activated Carbon

Adsorptive decolouration of anionic dye from water by goat dropping activated carbon prepared via microwave-assisted H3PO4 activation: process optimization using response surface methodology, isotherm and kinetics modelling

Microwave-assisted Preparation of Almond Shell-Based Activated Carbon for Methylene Blue Adsorption