Abstract:Based on efficiency and environmental concerns, the development of porous carbon from waste and biomass materials has attracted extensive attention as a novel approach. In this study, poplar sawdust was an inexpensive carbon precursor, sulfur-containing waste liquid (SCWL) was used as a modifier to turn waste into treasure, and potassium oxalate (K2C2O4) was a mild activator, successfully prepared N, S, O co-doped new porous activated carbon with excellent CO2 capture performance. The heteroatom doping and pore structure can be controlled by using SCWL and K2C2O4, and adjusting the activation temperature. The best sample (PCSK-2-3-800) prepared with SCWL and K2C2O4 showed excellent CO2 adsorption performance, reaching 3.82 and 5.61 mmol/g under normal pressure at 25 and 0 °C, respectively. This is attributed to the synergy of porous structure and surface chemistry. The pore structure parameter results showed that K2C2O4 promotes the development of activated carbon pore structure. The specific surface area, micropore volume and narrow micropore volume of PCSK-2-3-800 are 1418 m2/g, 0.55 cm3/g and 0.43 mL/g, respectively. The characterization results of FTIR and XPS showed that the addition of SCWL can successfully introduce heteroatoms into the carbon skeleton, and form CO2-philic active sites on the surface of the porous carbon. Both aspects promoted the adsorption of CO2. In addition, the PCSK-2-3-800 sample has a moderate adsorption heat of 27.13 kJ/mmol, good adsorption selectivity of CO2 and N2 is 13, and excellent recyclability, which is very promising for CO2 separation or storage. This paper develops a sustainable scheme for the first-time using biomass and SCWL to develop a new solid carbon adsorbent, which provides useful information and inspiration for capturing CO2.

Liver adenoma with granulomas. The appearance of granulomas in oral contraceptive-related hepatocellular adenoma and in the surrounding nontumorous liver.

Hierarchical Porous Carbon As a Highly Efficient Adsorbent for Toluene and Benzene

Removal of Toluene and SO2 by Hierarchical Porous Carbons: a Study on Adsorption Selectivity and Mechanism

Preparation of Porous Carbons from Oil Residues and Eliminating Sulfur from Simulant Fuel

Preparation of Hydrophobic Hierarchical Pore Carbon–silica Composite and Its Adsorption Performance Toward Volatile Organic Compounds

Synthesis of N-doped Hierarchical Porous Carbon with Excellent Toluene Adsorption Properties and Its Activation Mechanism

One-pot Synthesis of Ultrahigh Surface Area Porous Carbon from Coal Tar Residue: Characterization and Application in Phenol Removal

Pore structure modification and characterization of carbon adsorbent prepared by high-sulfur anthracite blending coal

Control of pore structure and surface chemistry of activated carbon derived from waste Zanthoxylum bungeanum branches for toluene removal in air

One-pot synthesis of self S-doped porous carbon for efficient CO2 adsorption

Low-Temperature Solvothermal Method for Coal Tar-Based Carbonaceous Mesophase Preparation and Its Excellent Performance

Preparation of N, S Co-Doped Carbon Nanotubes Composites by Coal Pyrolysis for the CO2 Capture

Ultra-highly porous carbon from Wasted soybean residue with tailored porosity and doped structure as renewable multi-purpose absorbent for efficient CO2, toluene and water vapor capture

Pore structure regulation of hierarchical porous carbon derived from coal tar pitch via pre-oxidation strategy for high-performance supercapacitor

Tuning surface chemical property in hierarchical porous carbon via nitrogen and phosphorus doping for deep desulfurization

Self-Activating Approach for Synthesis of 2,6-Naphthalene Disulfonate Acid Disodium Salt-Derived Porous Carbon and CO 2 Capture Performance

Conversion of coal into N-doped porous carbon for high-performance SO2 adsorption

Sulfur-Doped porous carbon Adsorbent: A promising solution for effective and selective CO 2 capture

Hierarchical porous activated carbon from waste Zanthoxylum bungeanum branches by modified H3PO4 activation for toluene removal in air

A cost-effective synthesis of heteroatom-doped porous carbon by sulfur-containing waste liquid treatment: As a promising adsorbent for CO2 capture

Effect of Porosity Parameters and Surface Chemistry on Carbon Dioxide Adsorption in Sulfur-Doped Porous Carbons