Abstract:Pyrolysis is a clean and efficient technology for the conversion of low-rank coal. Its key product is tar with high value. The complex composition of tar limits its further effective utilization. Although most kinetic models can provide the final distribution of three-phase products in coal pyrolysis, an effective prediction method for the specific composition of tar and gas has not yet been developed. Most numerical models serve to improve the total yield of volatile matter and cannot provide theoretical guidance for the improvement of tar quality or the reduction of carbon emission. Based on the basic assumptions of the CPD (Chemical Percolation Devolatilization) model for product molecules structure and generation mechanism, this paper proposed a more sophisticated method for dividing tar composition, which can achieve the division of light, medium, and heavy fractions of tar components according to boiling point. Light gas composition could be obtained with the combination of FG(Functional Group) submodel. The influence of pyrolysis final temperature, heating rate, and environmental pressure was explored for the yield and distribution of products of 18 coals. The simulation results showed that the total yield of tar was affected by both coal structure characteristics and operating parameters. Under conditions favorable for evaporation, such as low pressure and high temperature, the total yield of tar was positively correlated with the average aromatic core size in coal. Under other conditions, tar release was limited by its volatility. Coal with larger average aromatic core size corresponded to less tar yield instead. The pressure in the operating parameters had the most significant influence on the total yield of tar. The heavy fractions of tar are more sensitive to changes in operational parameters, making working conditions that increase the total yield of tar reduce tar quality. The overall carbon emission of pyrolysis is <1 kg CO 2 /kg tar, which is far lower than the 2–4 kg CO 2 /kg tar and 3–9 kg CO 2 /kg tar of direct and indirect liquefaction processes. Under the conditions of sufficient insulation time and no consideration of secondary reactions, the carbon emission of pyrolysis only depended on the content of carboxyl groups in the precursor functional groups. Therefore, the carbon emission intensity decreased with the increase of coal rank. For the optimization for total tar yield and tar quality, 1 atm pressure and 723–923 K temperature was optimal for low rank coals, while low temperature and heating rate with 10–20 atm pressure or high temperature and heating rate with 45–50 atm pressure were optimal for medium rank coals. For the optimization of light tar yield and tar quality, 6–9 atm pressure was optimal for low-rank coals, and 1–3 atm pressure was optimal for medium-rank coals.

An analysis of the carbonization process of coal-based activated carbon at different heating rates

An analysis of the carbonization process and volatile-release characteristics of coal-based activated carbon

Experimental Analysis of Intrinsic Kinetics and Rate Profiles for Coal Char Conversion under Different Atmospheres

Study on carbonization of lignin by TG-FTIR and high-temperature carbonization reactor

Preparation and performance of coal-based activated carbon based on an orthogonal experimental study

Activation of Poplar Sawdust and Anthracite Coal: Distinct Involvement of Aliphatic and Aromatic Structures in Pore Development

In-situ study of the heating rate effects on covalent bonds conversion and pore/carbon microcrystal evolutions of coal molecule during coking

Coke formation on activated carbon during catalytic upgrading of coal pyrolysis volatiles

Activated coke preparation by physical activation of coal and biomass co-carbonized chars

Experimental Study on Coal Partial Gasification Coproducing Char, Tar, and Gas

Effect of pyrolysis conditions on the improvement of the physicochemical structure of activated carbon obtained from Jixi bituminous coal

Preparation of amorphous coal-based activated coke via a two-step process of carbonization and steam activation

Investigation on the Thermal Behavior Characteristics and Products Composition of Four Pulverized Coals: Its Potential Applications in Coal Cleaning

Modified network kinetic model for coal pyrolysis with high-value products and low carbon emissions 1

The Research Advance of Preparation Process and Surface Property of Coal Based Activated Carbon

CO2 Gasification Kinetics and Structural Characteristics of Tri-High Coal Char Prepared at Elevated Temperature

Coking mechanism during thermal plasma pyrolysis of coal tar to acetylene

Spontaneous Combustion Risk of Coal-based Activated Carbon

Efficient Production of Activated Carbon with Well-Developed Pore Structure Based on Fast Pyrolysis-Physical Activation

Catalytic Upgrading of Coal Pyrolysis Volatiles by Porous Carbon Materials Derived from the Blend of Biochar and Coal

Thermal Decomposition Mechanisms of Coal and Coal Chars under CO 2 Atmosphere Using a Distributed Activation Energy Model