Abstract:To reduce switching loss, an insulated gate bipolar transistor (IGBT) with an inner primary blocking junction (IPBJ) is proposed and investigated. By inserting a P-drift between the N-drift and carrier storage (CS) layer, a primary blocking junction ( ${J}_{\text {PB}}{)}$ of the P-drift/N-drift junction and a secondary blocking junction ( ${J}_{\text {SB}}{)}$ of the P body/CS layer junction are formed. ${J}_{\text {PB}}$ is in the inner of the drift region and supports most of the blocking voltage. This reduces the electric potential in the CS layer and hole density in the hole inversion layer around the trench gate during the turn-on transient. Consequently, its turn-on loss ( ${E}_{\text {on}}{)}$ and electromagnetic interference (EMI) noise tradeoff relationship is improved. ${J}_{\text {PB}}$ is forward-biased by the ON-state excess hole in the P-drift. Thus, no electric field ( ${E}$ -field) builds in ${J}_{\text {PB}}$ until the excess hole in the P-drift is swept out by the ${E}$ -field extending from the reverse-biased ${J}_{\text {SB}}$ to ${J}_{\text {PB}}$ . Hence, with almost no excess hole in the P-drift, the ${E}$ -field in ${J}_{\text {PB}}$ can build fast in both the P-drift and N-drift directions. This reduces the collector voltage rising time, as well as turn-off loss ( ${E}_{\text {off}}{)}$ . Simulation results show that, compared with the state-of-the-art carrier-stored trench-gate bipolar transistor (CSTBT), the proposed 650-V class silicon IPBJ-IGBT reduces ${E}_{\text {off}}$ by 79.7% with the same ON-state voltage ( ${V}_{\text {on}}{)}$ and reduces ${E}_{\text {on}}$ by 77.9% with the same current overshoot ( ${I}_{\text {peak}}{)}$ . Besides, with its ${E}$ -field and electric potential distribution optimized, the IPBJ-IGBT also improves its blocking characteristic, short-circuit withstand capability, and unclamped inductive switching performance.

Effects of Current Filaments on IGBT Avalanche Robustness: A Simulation Study

An Experimental And Numerical Investigation Of Igbt Blocking Characteristics

Investigation on Robust Avalanche Capacity of Super-Junction IGBT under UIS Stress

A Novel High-Voltage Trench Gate Insulated Gate Bipolar Transistor With Diffusion Remnant Layer

Off-state Avalanche Breakdown Induced Degradation in 20 V NLDMOS Devices

The Effect of the Hole Current on the Channel Inversion in Trench Insulated Gate Bipolar-Transistors (Tigbt)

Numerical Analysis for a P-Drift Region N-IGBT With Enhanced Dynamic Electric Field Modulation Effect

The trench Insulated Gate Bipolar Transistor— a high power switching device

Study on the Effects of Burst Pulse Magnetic Field Interference in IGBT Switching Circuit for High Power Application

2-D Modelling and Optimisation of Trench Insulated Gate Bipolar Transistors (TIGBT)

2D-TCAD Simulation Study of Capture Layer and Repellent Layer of Current Filament in Trench-Gate IGBTs

Suppression of Parasitic Jfet Effect in Trench Igbts by Using A Self-Aligned P Base Process

Physical Model of FS-IGBT Considering Dynamic Avalanche Electrical Characteristics and Analysis of Chip Non-uniform Stress

Analysis of IGBT Reliability Considering Bonding Line Fault

Experimental Study of the Anode Injection Efficiency Reduction of 3.3-Kv-class Npt-Igbts Due to Backside Processes

Experimental Investigations on Current Sharing Characteristics of Parallel Chips inside Press-pack IGBT devices

Avalanche effects on current & voltage characteristics in SiGe HBT

Enhanced Conduction Characteristics in SiC IGBT with Floating P-Grid Shielded Thick Current Storage Layer

Numerical Analysis of an Ultralow Switching Loss IGBT with an Inner Primary Blocking Junction

Gate Field Plate Igbt with Trench Accumulation Layer for Extreme Injection Enhancement

Improved turn-off capability of IGBT with LIHT structure