Abstract:Understanding the oxidation of Ni-based single crystal (SX) superalloys is significantly important because oxidation can damage the microstructure and eventually lead to failure of the alloy. Using advanced scanning/transmission electron microscopy, oxidation effects on the microstructure of a SX superalloy during heat treatment and simulated service (stress/temperature coupling) conditions are systematically investigated in order to reveal oxide microstructures and oxidation mechanisms. Heat treatment in argon results in less weight loss, thinner γ′-free layer and fewer internal oxidation than that treated in air. But the oxide layer structures and influence depths of oxidation in both atmospheres are similar. External tensile stress not only accelerates the oxidation of alloy but also affects the oxide microstructures. Moreover, stress effects on the oxidation microstructure depend on temperature. At 750 °C, Ni–Co oxides are formed on the alloy surface, followed by the inner layer of Ni–Co–Mo–Re–W oxides at the location of original γ phase under stress free condition. As the stress increases, an oxide layer mainly containing Al, Cr, Nb, Mo and Re elements is formed between the above two oxide layers. When temperature increases to 1050 °C, as applied tensile stress increases, the thickness of oxide layer increases but the structure of oxide layer is not obviously changed.

Effects of Different Surface Native Pre-Oxides on the Hot Corrosion Properties of Nickel-Based Single Crystal Superalloys

Influence of Cr Content on Hot Corrosion and a Special Tube Sealing Test of Single Crystal Nickel Base Superalloy

High-temperature oxidation and hot corrosion of Ni-based single crystal superalloy in the incubation stage

The Effects of Alloying Elements Cr, Al, and Si on Oxidation Behaviors of Ni-Based Superalloys

Effect of Pre-Oxidation on the Hot Corrosion of CoNiCrAlYRe Alloy

A Study of the Hot Salt Corrosion Behavior of Three Nickel-Based Single-Crystal Superalloys at 900 °C

Investigation on the hot corrosion behavior of a single crystal Ni-based superalloy in molten Na2SO4+K2SO4 salts improved by different preoxidation treatments

Hot corrosion of sputtered nanocrystalline coating with and without preoxidation and arc ion plating coating on a Ni-based single-crystal superalloy

The Effect of Surface Machining on the High-Temperature Oxidation of A Single Crystal Ni-Based Superalloy

Hot Corrosion of Arc Ion Plating NiCrAlY and Sputtered Nanocrystalline Coatings on a Nickel-Based Single-Crystal Superalloy

Effect of Alloying Chemistry on Fireside Corrosion Behavior of Ni–Fe-Based Superalloy for Ultra-supercritical Boiler Applications

Effects of Ni and Cr on the high-temperature oxidation behavior and mechanisms of Co- and CoNi-base superalloys

Effect of Platinum and Pre-Oxidation on the Hot Corrosion Behavior of Aluminide Coating with NaCl at 1050 °C

Oxidation behavior of a nickel-based single crystal superalloy at 1100 °C under different oxygen concentration

The synergy effect of elements on the oxidation resistance of a high-purity directionally solidification nickel-based superalloy

Effect of trace sulfur on the hot corrosion resistance of Ni-base single crystal superalloy

Effect of Pre-Oxidation on High-Temperature Oxidation Behavior of Al-Si Coating on Nickel-Based Superalloy

Effect of Pt-rich Position on the Hot Corrosion Behavior of NiCoCrAlY Coating for a Single-Crystal Superalloy

Optimization of Pre-Oxidation Time for Corrosion Resistance of Cobalt Based Coating Alloy in Mixed Sulphates

The Effect of Oxidation on Microstructures of a Ni-based Single Crystal Superalloy During Heat-Treatment and Simulated Service Conditions

The effect of manganese and silicon additions on the corrosion resistance of a polycrystalline nickel-based superalloy