Abstract:Abstract In recent years, the use of printing methods to fabricate electronic devices (printed electronics) has attracted attention because of their low cost and low environmental impact. Printing technology enables the high-throughput fabrication of electrical circuits on film substrates, thereby providing inexpensive personal healthcare devices to monitor health status in real-time, for example. Temperature detection is one of the central concerns as a fundamental physical quantity in various fields. In 2013, a highly sensitive flexible thermistor was reported by formulating aqueous inks of nickel oxide (NiO) nanoparticles for inkjet printing. However, it required a high-temperature calcination process of more than 200 °C, which led to the use of expensive polyimide films with high heat resistance. It is necessary to promote further the development of low-temperature processes for printed thermistors to realize flexible negative temperature coefficient (NTC) thermistors at low cost using printed electronics technology. Moreover, in screen printing and inkjet printing, the definition of the ink pattern applied on the substrate changes due to spreading and coffee distortion phenomena, and the thickness between sensors becomes non-uniform, which is a structural consistency problem that can lead to variations in sensing performance. Therefore, in this study we developed low-temperature processable printed NTC thermistors with a temperature-sensitive layer of NiO by using reverse offset printing. The NTC thermistors were fabricated by printing a comb-like pattern of silver nanoparticles and a thin NiO film. In addition, the low-temperature formation of a NiO layer by oxygen plasma treatment was investigated, and x-ray photoelectron spectroscopy was used to carry out compositional analysis of the surface. Together with the plasma-assisted calcination, a flexible NTC thermistor formed on polyethylene terephthalate film is demonstrated.

Novel Method for NTC Thermistor Production by Aerosol Co-Deposition and Combined Sintering

Ti/NiCu/Ag and Al/NiCu/Ag Thin Film Deposited on Positive Temperature Coefficient (PTC) Thermistor by Direct Current Magnetron Sputtering

Crystal structure, cation distribution and electrical properties in Ni Al Mn3−−O4 (0 < x < 0.6; 0 < y < 0.3) spinel-based NTC chip thermistors

Epma and Xrd Study on Nickel Metal Thin Film for Temperature Sensor

Preparation and Electrical Properties of Mn1.05−yCo1.95−x−z−wNixMgyAlzFewO4 NTC Ceramic Derived from Microemulsion Method

Preparation and characterization of LaMn 0.5 Co 0.5 O 3 –Ni 0.66 Mn 2.34 O 4 composite NTC ceramics

LaCr0.7Fe0.3O3-NiMn2O4 supported NTC composite ceramics with a sandwich-like structure

Fabrication and enhanced electrical stability of Mn–Co–Fe–Zn–O NTC thin films by low temperature ion-beam-assisted deposition technology

Printed Electronics by Plasma Spraying: Case Study for High Temperature Sensors

Synthesis of nanocrystalline manganite powders via a gel auto-combustion process for NTC thermistor applications

Nickel oxide-based flexible thin-film NTC thermistors by using reverse offset printing

Investigating the Temperature Dependency of Trimethyl Aluminum Assisted Atomic Surface Reduction of Li and Mn Rich NCM

A novel cold-wall MOCVD method for fabrication of a durable micro-machined SnO2 gas sensor

Crystal Structure, Cation Distribution and Electrical Properties in NixAlyMn3−x−yO4 (0 < X < 0.6; 0 < Y < 0.3) Spinel-Based NTC Chip Thermistors

Improving the sensitivity of LaMnO 3 NTC films by Al ion implantation

High-solid content, low viscosity and long-term stability Mn–Co–Ni–O ceramic slurry for the fabrication of free-standing ultrathin NTC sheets

Comparison of morphology, electrical properties and sensitivity between bulk and thin-film Mn1.5Co1Ni0.5O4 thermistors

Cofiring of LTCC multilayer assemblies with integrated NTC thermistor temperature sensor layers

Effect of particle contact on the electrical performance of NTC-epoxy composite thermistors

Thermally Coupled NTC Disc Thermistors for Power Applications

A Thermal Airflow Sensor Based on Mn-Co-Ni-O Thin Film