Abstract:Ni- or Mn-rich cathode materials have attracted great interest for electric vehicle (EV) applications due to their high gravimetric and volumetric energy densities and low- or cobalt-free compositions. For example, Ni-rich LiNi 1-x Co x/2 Mn x/2 O 2 (NMC) layered cathodes can deliver > 200 mAh/g when they operate at above 4.3 V vs.Li . Cobalt-free LiNi 0.5 Mn 1.5 O 4 (LNMO) spinel operates at around 4.75 V vs.Li and delivers an excellent rate capability due to three-dimensional Li-diffusion pathways in its lattice. However, due to lack of high-voltage stabilities of conventional, carbonate-based electrolytes, such high-voltage operation (> 4.3 V vs.Li ) led to unwanted electrolyte oxidation and simultaneous parasitic reactions occurring at CEI. Different types of cathodes have their own failure mechanisms which are often associated with side reactions occurring at solid-electrolyte interphase (SEI) on graphite anodes. This was possible because the reaction by-products from CEI could migrate and attack SEI layers on anodes. To address the high-voltage related issues, various approaches have been proposed such as tuning chemical compositions of cathode active materials, surface modification of cathodes or anodes, and stabilizing the CEI or SEI using electrolyte additives. In literature, however, there was no single solution that can resolve all the complex issues occurring in the high-voltage battery cells. For example, coated layers on active materials are prone to fail during long-term cycling due to mechanical failure (e.g., crack and pulverization) of active materials. In addition, not only active materials but carbon conductors (e.g., acetylene black) inside a cathode leads to the electrolyte oxidation, prompted by its high electronic conductivity and large surface area. Considering that such parasitic reactions originate from CEI and propagate to anode SEI, there is a dire need of multimodal strategies that can create synergistic effect on stabilizing the electrode-electrolyte interphases in cell level. In this presentation, I will introduce non-conventional strategies that can effectively enhance electrode-electrolyte interphase stabilities and improve full-cell (i.e., using graphite anodes) performances. First, formation of self-healing CEI on cathode active materials will be demonstrated. The interface of LNMO spinel oxide will be passivated by Ti-enriched shell via sacrificial transition metal dissolutions and suppress the side reactions occurring at CEI. Second, a strategy for passivating both cathode active materials and carbon black conductor by using functional binders will be demonstrated. Since the binder coating will be performed in-situ during a slurry preparation, no extra process will be required while implementing this approach to a cell manufacturing. Finally, solid-electrolyte implemented NMC or LNMO cathodes will be demonstrated as an effective approach to stabilize the high-voltage performance by offering good Li-ion conduction pathways at CEI layer. Improvement mechanism of each approach will be also presented based on physical and electrochemical characterization data. Electrochemical impedance spectroscopy (EIS) revealed a suppression of CEI interfacial resistance during cycling, suggesting the enhanced stability of the multifunctional CEI. Various microscopy and spectroscopy data acquired from cycle-aged CEI and graphite SEI will be corelated to the cell performance data and identify the CEI property-performance relationship. These unique multifunction CEI strategies will be applicable to various cathode materials for the next-generation Li-ion batteries. Figure 1

Exploring the Role of an Electrolyte Additive in Suppressing Surface Reconstruction of a Ni-Rich NMC Cathode at Ultrahigh Voltage via Enhanced In Situ and Operando Characterization Methods

Tracing the Cross‐Talk Phenomenon of Vinylethylene Carbonate to Unveil its Counterintuitive Influence as an Electrolyte Additive on High‐Voltage Lithium‐Ion Batteries

The Study of Thin Film High–voltage Li-Ion Cathodes to Reveal Surface Reactions and Coating Performance

Improving the Cycling Performance of High-Voltage NMC111 || Graphite Lithium Ion Cells by an Effective Urea-Based Electrolyte Additive

Dimethyl Sulfide Electrolyte Additive Enabled High-Voltage Lithium-Ion Battery

Mechanistic Study of Electrolyte Additives to Stabilize High-Voltage Cathode-Electrolyte Interface in Lithium-Ion Batteries.

Investigating and Optimizing Interfacial Properties of Electrode Materials for Lithium-ion and Sodium-ion Batteries

Investigation of Anode/Cathode Electrolyte Interfaces at High Cell Voltages with and Without Additives

On the Formation of a Cathode Electrolyte Interphase on High Voltage Li-ion Cathodes

Investigating Cathode Electrolyte Interphase Formation in NMC 811 Primary Particles through Advanced 4D-STEM ACOM Analysis

Investigating the influence of vinylene carbonate concentrations on battery stability: role of electrode/electrolyte interfaces

Improving interfacial stability of ultrahigh-voltage lithium metal batteries with single-crystal Ni-rich cathode via a multifunctional additive strategy

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

(Invited) Non-Conventional, Multimodal Strategies to Create Synergistic Effects on Electrode-Electrolyte Interphase Stabilities in Lithium-Ion Batteries

Vinylene Carbonate as a Highly Effective Electrolyte Additive for Li3VO4 Anodes with Enhanced Electrochemical Performance

Improving LiNixCoyMn1−x−yO2 Cathode Electrolyte Interface under High Voltage in Lithium Ion Batteries

Disparity among cyclic alkyl carbonates associated with cathode electrolyte interphase at high voltage

Uncovering the Crucial Role of Chelating Structures in Cyano-Alkyl-Phosphate Electrolytes for High-Voltage Lithium Metal Batteries

Interphasial engineering for Ni-rich NMC cathode materials

Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries

Anionic Additive-Integrated Electrolyte Therapy: Enhancing High-Voltage Stability and Performance in Lithium-Ion Batteries