Abstract:Author(s): Alvarado, Judith Elizabeth | Advisor(s): Meng, Ying Shirley | Abstract: The current commercial lithium ion battery utilizes “host-guest” electrodes that allow for the intercalation of lithium between the crystal lattice of the anode and cathode materials. The lithium ions are transported through the electrolyte medium during the charge/discharge process, Given their success, lithium ion batteries have now penetrated the electric vehicle market and large scale grid storage, which require batteries with much higher energy densities. To meet this demand, alternative anode and cathode chemistries are required. Consequently, this will put high strain on the electrolyte which will decompose at both low and high potentials to form a passivation layer known as the solid electrolyte interphase (SEI). Herein, the fundamental reduction mechanism of fluoroethylene carbonate (FEC) is investigated as an additive for conventional electrolytes to improve the SEI formation on various silicon anodes using a series of advanced spectroscopic and microscopic techniques. For the first time, the direct visualization of the SEI generated on the silicon nanoparticle is investigated by scanning electron microscopy and its chemical composition by electron energy loss spectroscopy. The SEI is further investigated on lithium metal anode. Highly concentrated bisalt ether electrolytes form a SEI that is dominated by salt decomposition rather than solvent decomposition, which enables high lithium metal cycling efficiencies. At high potentials the electrolyte oxidizes on the cathode to form the cathode electrolyte interphase (CEI). With the discovery of 5V cathode materials, a new electrolyte is required. Therefore, sulfone based electrolytes are studied as potential high voltage electrolyte. Combined with lithium bis(fluorosulfonyl) imide, this solvent-salt synergy addresses the traditional performance issues that develop at the interface of high voltage cathodes. The factors that affect the cycling performance of cathode materials for lithium ion batteries are also seen in sodium ion batteries. Atomic layer deposition (ALD) is widely used to improve the cycling performance, coulombic efficiency of batteries, and to maintain electrode integrity for LIBs. Therefore, this approach is used to understand the effect of Al2O3 ALD coating on P2-Na2/3Ni1/3Mn2/3O2 cathodes, which lowers the cathode impedance and improves particle morphology after cycling. Improving the electrode-electrolyte interface is critical to the development of next generation high density energy storage systems.

Investigation of Anode/Cathode Electrolyte Interfaces at High Cell Voltages with and Without Additives

Mechanistic Study of Electrolyte Additives to Stabilize High-Voltage Cathode-Electrolyte Interface in Lithium-Ion Batteries.

Tracing the Cross‐Talk Phenomenon of Vinylethylene Carbonate to Unveil its Counterintuitive Influence as an Electrolyte Additive on High‐Voltage Lithium‐Ion Batteries

Exploring the Role of an Electrolyte Additive in Suppressing Surface Reconstruction of a Ni-Rich NMC Cathode at Ultrahigh Voltage via Enhanced In Situ and Operando Characterization Methods

Dimethyl Sulfide Electrolyte Additive Enabled High-Voltage Lithium-Ion Battery

Investigating and Optimizing Interfacial Properties of Electrode Materials for Lithium-ion and Sodium-ion Batteries

S-containing and Si-containing compounds as highly effective electrolyte additives for SiOx -based anodes/NCM 811 cathodes in lithium ion cells

Modulation and quantitative study of conformal electrode-electrolyte interfacial chemistry toward high-energy-density LiNi0.6Co0.2Mn0.2O2‖SiO-C pouch cells

Understanding the Conductive Carbon Additive on Electrode/Electrolyte Interface Formation in Lithium-Ion Batteries Via in Situ Scanning Electrochemical Microscopy

Disparity among cyclic alkyl carbonates associated with cathode electrolyte interphase at high voltage

Effect of High-Voltage Additives on Formation of Solid Electrolyte Interphases in Lithium-Ion Batteries

Revealing the Influence of Electrolyte Additives in Reducing the Heat Generation of High Voltage Lithium‐Ion Batteries using Operando Accelerating Rate Calorimetry (ARC)

Perfluoroalkyl-substituted Ethylene Carbonates: Novel Electrolyte Additives for High-Voltage Lithium-Ion Batteries

Anion-π Interaction and Solvent Dehydrogenation Control Enable High-Voltage Lithium-ion Batteries

Anodic Oxidation of Conductive Carbon and Ethylene Carbonate in High-Voltage Li-Ion Batteries Quantified by On-Line Electrochemical Mass Spectrometry

Single vs. Blended Electrolyte Additives: Impact of a Sulfur-Based Electrolyte Additive on Electrode Cross-talk and Electrochemical Performance of LiNiO2||Graphite Cells

Development of Electrolyte Additives to Enable High-Voltage LiNi0.5Mn1.5O4 Lithium Ion Batteries

Electrochemical analysis of electrolyte additive effect on ionic diffusion for high-performance lithium ion battery

Research on the synergistic effect of fluoroethylene carbonate and lithium difluoro(oxalato)borate in electrolyte on LiNi0.5Mn1.5O4-based high-voltage lithium-ion batteries

Unveiling the Critical Role of Ion Coordination Configuration of Ether Electrolytes for High Voltage Lithium Metal Batteries