Abstract:Ni- or Mn-rich cathode materials have attracted great interest for electric vehicle (EV) applications due to their high gravimetric and volumetric energy densities and low- or cobalt-free compositions. For example, Ni-rich LiNi 1-x Co x/2 Mn x/2 O 2 (NMC) layered cathodes can deliver > 200 mAh/g when they operate at above 4.3 V vs.Li . Cobalt-free LiNi 0.5 Mn 1.5 O 4 (LNMO) spinel operates at around 4.75 V vs.Li and delivers an excellent rate capability due to three-dimensional Li-diffusion pathways in its lattice. However, due to lack of high-voltage stabilities of conventional, carbonate-based electrolytes, such high-voltage operation (> 4.3 V vs.Li ) led to unwanted electrolyte oxidation and simultaneous parasitic reactions occurring at CEI. Different types of cathodes have their own failure mechanisms which are often associated with side reactions occurring at solid-electrolyte interphase (SEI) on graphite anodes. This was possible because the reaction by-products from CEI could migrate and attack SEI layers on anodes. To address the high-voltage related issues, various approaches have been proposed such as tuning chemical compositions of cathode active materials, surface modification of cathodes or anodes, and stabilizing the CEI or SEI using electrolyte additives. In literature, however, there was no single solution that can resolve all the complex issues occurring in the high-voltage battery cells. For example, coated layers on active materials are prone to fail during long-term cycling due to mechanical failure (e.g., crack and pulverization) of active materials. In addition, not only active materials but carbon conductors (e.g., acetylene black) inside a cathode leads to the electrolyte oxidation, prompted by its high electronic conductivity and large surface area. Considering that such parasitic reactions originate from CEI and propagate to anode SEI, there is a dire need of multimodal strategies that can create synergistic effect on stabilizing the electrode-electrolyte interphases in cell level. In this presentation, I will introduce non-conventional strategies that can effectively enhance electrode-electrolyte interphase stabilities and improve full-cell (i.e., using graphite anodes) performances. First, formation of self-healing CEI on cathode active materials will be demonstrated. The interface of LNMO spinel oxide will be passivated by Ti-enriched shell via sacrificial transition metal dissolutions and suppress the side reactions occurring at CEI. Second, a strategy for passivating both cathode active materials and carbon black conductor by using functional binders will be demonstrated. Since the binder coating will be performed in-situ during a slurry preparation, no extra process will be required while implementing this approach to a cell manufacturing. Finally, solid-electrolyte implemented NMC or LNMO cathodes will be demonstrated as an effective approach to stabilize the high-voltage performance by offering good Li-ion conduction pathways at CEI layer. Improvement mechanism of each approach will be also presented based on physical and electrochemical characterization data. Electrochemical impedance spectroscopy (EIS) revealed a suppression of CEI interfacial resistance during cycling, suggesting the enhanced stability of the multifunctional CEI. Various microscopy and spectroscopy data acquired from cycle-aged CEI and graphite SEI will be corelated to the cell performance data and identify the CEI property-performance relationship. These unique multifunction CEI strategies will be applicable to various cathode materials for the next-generation Li-ion batteries. Figure 1

Interphasial engineering for Ni-rich NMC cathode materials

Ionic Conductive Interface Boosting High Performance LiNi0.8Co0.1Mn0.1O2 for Lithium Ion Batteries

An Interphase Engineering Method of Stabilizing Ni‐rich Cathode in Lithium‐ion Batteries by A Nucleophilic‐based Additive

Tailoring Grain Boundary Structures and Chemistry of Ni-rich Layered Cathodes for Enhanced Cycle Stability of Lithium-Ion Batteries

Improving LiNixCoyMn1−x−yO2 Cathode Electrolyte Interface under High Voltage in Lithium Ion Batteries

Electrolytes Polymerization‐Induced Cathode‐Electrolyte‐Interphase for High Voltage Lithium‐Ion Batteries

Toward a High-Voltage Practical Lithium Ion Batteries with Ultraconformal Interphases and Enhanced Battery Safety

Stabilizing the Interphase in an Ultra-High-Nickel Cathode Enabling High-Performance Lithium-Ion Batteries

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Advancements and Challenges in High-Capacity Ni-Rich Cathode Materials for Lithium-Ion Batteries

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Investigating Cathode Electrolyte Interphase Formation in NMC 811 Primary Particles through Advanced 4D-STEM ACOM Analysis

(Invited) Non-Conventional, Multimodal Strategies to Create Synergistic Effects on Electrode-Electrolyte Interphase Stabilities in Lithium-Ion Batteries

Improving interfacial stability of ultrahigh-voltage lithium metal batteries with single-crystal Ni-rich cathode via a multifunctional additive strategy

Electrochemical interface modification strategies for high-performance Ni cathodes: a comprehensive review and outlook

Designing In-Situ-Formed Interphases Enables Highly Reversible Cobalt-Free LiNiO2 Cathode for Li-ion and Li-metal Batteries

Quenching-Induced Ultrathin LiF-Rich Interphases on LiNi0.8Co0.1Mn0.1O2 Cathode

Constructing fast-ion-diffusion cathode-electrolyte-interphase to improve LiNi0.8Co0.1Mn0.1O2 cathode cyclic stability with composite polymer conductors

In-depth understanding of the deterioration mechanism and modification engineering of high energy density Ni-rich layered lithium transition-metal oxide cathode for lithium-ion batteries

Self-repaired Cathode Electrolyte Interphase to Stabilize the High-Nickel Cathode Interface by a Sustained-Release Multifunctional Electrolyte Additive