Abstract:Electrochemical energy storage (EES) is still key to realize wide spread use of renewable energies. For large-scale EES production, the development of high energy density, non-toxic, cost-effective materials is necessary. In this study, a cobalt free active material, Lithium Nickel Manganese Oxide, LiNi0.5Mn1.5O4 (LNMO), was employed in the production of cathodes for high voltage lithium ion battery (LIB) applications. LNMO is an attractive cathode active material due to its high operating potential (~4.7 vs. Li/Li+ [1]), non-toxicity and low cost. The practical application of LNMO cathodes in LIBs has been relatively limited, especially for large scale application, due challenges associated with the material (i.e. electrolyte decomposition at high voltage, self-discharge and dissolution of the transition metals [2]). Electrolyte additives are an effective way to address these challenges, without major cost increase or changes to the production approach. In this study the role of different electrolyte additives in high-voltage full-cell LIBs with both graphite and silicon-graphite anodes is investigated. Additives known for their solid electrolyte interphase (SEI) forming ability (i.e. vinylene carbonate (VC) and fluoroethylene carbonate (FEC)), as well as additives that play additional roles such as cathode electrolyte interface formation or HF scavenging (i.e. tris(trimethylsilyl) phosphite (TMSP) and succinate anhydride (SA)), are used [3]. Galvanostatic cycling measurements were performed in 3-electrode cells in order to investigate the rate capability and long term cycling stability of LMNO/Gr and LMNO/Gr-Si full-cells with different electrolyte additives. The electrochemical characterization was verified with post mortem analysis to confirm the SEI composition, chemical and mechanical stability of the electrodes and lack of lithium plating. Post mortem investigations were done with Raman spectroscopy, scanning electron microscopy-energy dispersive X-ray analysis (SEM-EDX) and optical microscopy. Improved rate performance and better long term cycling stability of both full-cell chemistries was achieved for electrolytes containing the TMSP additive. References: [1] G. Gabrielli, M. Marinaro, M. Mancini, P. Axmann and M. Wohlfahrt-Mehrens, J. Power Sources 351 (2017) 35-44. [2] R. Amin, N. Muralidharan, R. K. Petla, H. Ben Yahia, S. A. Jassim Al-Hail, R. Essehli, C. Daniel, M. A. Khaleel, I. Belharouak, J. Power Sources, 467 (2020) 228318. [3] K. Kim, H. Ma, S. Park, N.-S. Choi, ACS Energy Lett., 5 (2020) 1537-1553.

Vinylene Carbonate as a Highly Effective Electrolyte Additive for Li3VO4 Anodes with Enhanced Electrochemical Performance

Non-destructive Chemical Prelithiation of VO2(B) Anodes Constructing a Multifunctional Interphase Layer for Advanced Li-Ion Batteries

Synergistic effect of vinylene carbonate (VC) and LiNO3 as functional additives on interphase modulation for high performance SiO anodes

Insights into the multi-functional lithium difluoro(oxalate)borate additive in boosting Li-ion reaction kinetics for Li3VO4 anodes

Effect of vinylene carbonate as additive to electrolyte for lithium metal anode

Constructing Solid Electrode-Electrolyte Interfaces in High-Voltage Li| LiCoO2 Batteries under Dual-Additive Electrolyte Synergistic Effect

Influences of Additives on the Formation of a Solid Electrolyte Interphase on MnO Electrode Studied by Atomic Force Microscopy and Force Spectroscopy

Role of 1, 3-Propane Sultone and Vinylene Carbonate in Solid Electrolyte Interface (SEI) Formation and Gas Generation

An elaborate insight of lithiation behavior of V2O5 anode

Effects of electrolyte additive on the electrochemical performance of Si/C anode for lithium-ion batteries

Adjusting Interfacial Reactions for Achieving Highly Stable Operation in Lithium Metal Batteries

Sulfonated poly(vinyl alcohol) as an artificial solid electrolyte interfacial layer for Li metal anode

Vinyltrimethylsilane as a novel electrolyte additive for improving interfacial stability of Li-rich cathode working in high voltage

Non-destructive chemical prelithiation of VO 2 (B) anodes constructing a multifunctional interphase layer for advanced Li-Ion batteries

Development of Electrolyte Additives to Enable High-Voltage LiNi0.5Mn1.5O4 Lithium Ion Batteries

Artificial Cathode-Electrolyte Interphase towards High-Performance Lithium-Ion Batteries: A Case Study of β-AgVO3

Embedding amorphous lithium vanadate into carbon nanofibers by electrospinning as a high-performance anode material for lithium-ion batteries

Agitation drying synthesis of porous carbon supported Li3VO4 as advanced anode material for lithium-ion batteries

Effect of solid electrolyte interface (SEI) film on cyclic performance of Li4Ti5O12 anodes for Li ion batteries

Revisiting the designing criteria of advanced solid electrolyte interphase on lithium metal anode under practical condition

Anion-π Interaction and Solvent Dehydrogenation Control Enable High-Voltage Lithium-ion Batteries