Abstract:Silicon is considered as a promising candidate of the anode material for the next generation lithium-ion batteries, due to its substantially higher gravimetric and volumetric capacity compared to conventionally used graphite. Electrolyte additives, fluoroethylene carbonate (FEC) and vinylene carbonate (VC) particularly, are usually applied for silicon-based lithium-ion batteries to tackle the problems such as poor capacity retention and low coulombic efficiency.1-3 In the present work, the decomposition mechanism of FEC as well as the surface modification of Si electrodes were investigated.4 It was observed that the FEC additive degrades at a higher reduction potential prior to the other carbonate solvents. A conformal solid electrolyte interphase (SEI), which consists of the decomposition products of FEC, is instantaneously formed on the silicon electrode as a result. This stable SEI layer sufficiently limits the emergence of cracks and suppresses the additional SEI formation from the decomposition of other electrolyte components. Both of these effects lead to a slower increase in polarization, thus a slower capacity fading, for the FEC containing cell. The differences in the SEI layer, formed with or without the presence of FEC, are schematically demonstrated in Fig 1. Besides, it was also observed that the LiPF6 decomposition can be influenced with the presence of FEC, and this was further studied with a combination of X-ray photoelectron spectroscopy (XPS) and solid-state nuclear magnetic resonance (NMR) techniques. We also demonstrated that by forming an effective SEI layer with the FEC and VC electrolyte additives, the silicon electrodes can be equally well functioning with a novel lithium 4,5-dicyano-2-(trifluoromethyl)imidazolide (LiTDI)-based electrolyte as with the state-of-art LiPF6-based electrolyte.5 Figure 1

Vinyltrimethylsilane as a novel electrolyte additive for improving interfacial stability of Li-rich cathode working in high voltage

A Multifunctional Additive Capable of Electrolyte Stabilization and Structure/Interphases Regulation of High‐Energy Li‐Ion Batteries

Solid Electrolyte Interface Film-Forming and Surface-Stabilizing Bifunctional 1,2-Bis((trimethylsilyl)oxy) Benzene As Novel Electrolyte Additive for Silicon-Based Lithium-Ion Batteries.

Dimethyl Sulfide Electrolyte Additive Enabled High-Voltage Lithium-Ion Battery

Tailored Interphases Construction for Enhanced Si Anode and Ni-Rich Cathode Performance in Lithium-Ion Batteries

Vinylene Carbonate as a Highly Effective Electrolyte Additive for Li3VO4 Anodes with Enhanced Electrochemical Performance

Multifunctional organosilicon compound contributes to stable operation of high-voltage lithium metal batteries

Adjusting Interfacial Reactions for Achieving Highly Stable Operation in Lithium Metal Batteries

Synergistic effect of vinylene carbonate (VC) and LiNO3 as functional additives on interphase modulation for high performance SiO anodes

Improving Toleration of Volume Expansion of Silicon-Based Anode by Constructing a Flexible Solid-Electrolyte Interface Film via Lithium Difluoro(bisoxalato) Phosphate Electrolyte Additive

Synchronous dual additives to boost multiphase interface stability of high-voltage Li-rich Mn-based batteries

Understanding the Roles of Electrolyte Additives on the Surface Modification Mechanism of Silicon-Based Anodes in Lithium-Ion Batteries

An Additive-Enabled Ether-Based Electrolyte to Realize Stable Cycling of High-Voltage Anode-Free Lithium Metal Batteries

LiPO2F2 electrolyte additive for high-performance Li-rich cathode material

Lithium hexamethyldisilazide as electrolyte additive for efficient cycling of high-voltage non-aqueous lithium metal batteries

Enhancing the interfacial stability of high‐energy Si/graphite||LiNi0.88Co0.09Mn0.03O2 batteries employing a dual‐anion ionic liquid‐based electrolyte

Enhanced Capacity Retention of Li3V2(PO4)3-Cathode-Based Lithium Metal Battery Using SiO2-Scaffold-Confined Ionic Liquid as Hybrid Solid-State Electrolyte

A bicomponent electrolyte additive towards stabilized interface for high-performance lithium-ion batteries

Functionalities of the LiV3-xNbxO8 surface layer on a Li2NiO2 cathode additive for enhancing the moisture stability and cycling performance of lithium-ion batteries

Steric Effect Tuned Ion Solvation Enabling Stable Cycling of High-Voltage Lithium Metal Battery

In situ constructing a stable interface film on high-voltage LiCoO2 cathode via a novel electrolyte additive