Abstract:In order to efficiently extract power from piezoelectric vibration energy harvesters, various active rectifiers have been proposed in the past decade, which include synchronized switch harvesting on inductor (SSHI), synchronous electric charge extraction (SECE), and so on. Although reported active rectifiers show good performance improvements compared to full-bridge rectifiers (FBRs), large off-chip inductors are typically required and the system volume is inevitably increased as a result, counter to the requirement for system miniaturization. In this paper, a fully integrated split-electrode synchronized switch harvesting on capacitors (SSHC) rectifier is proposed, which achieves significant performance enhancement without employing any off-chip components. The proposed circuit is designed and fabricated in a 0.18- <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> CMOS process and it is co-integrated with a custom microelectromechanical systems (MEMS) piezoelectric transducer with its electrode layer equally split into four regions. The measured results show that the proposed rectifier can provide up to 8.2 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\times $ </tex-math></inline-formula> and 5.2 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\times $ </tex-math></inline-formula> boost, using on-chip and off-chip diodes, respectively, in harvested power compared to an FBR under low excitation levels and the peak rectified output power achieves 186 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu \text{W}$ </tex-math></inline-formula> .

A Low-Power CMOS Current Reference for Piezoelectric Energy Harvesters

New Technique: A Low Drift Current Reference Based on PMOS Temperature Correction Technology.

A High-Efficiency Piezoelectric Energy Harvesting and Management Circuit Based on Full-Bridge Rectification

A Low-Power Voltage Reference Source for Lithium Battery Protection ICs

A Sub-μA Quiescent Current Power Management System with SAR-based Adaptive MPPT for Piezoelectric Energy Harvesting

A Nail-Size Piezoelectric Energy Harvesting System Integrating a MEMS Transducer and a CMOS SSHI Circuit

mm-Scale and MEMS piezoelectric energy harvesters powering on-chip CMOS temperature sensing for IoT applications

A Cold-Startup SSHI Rectifier for Piezoelectric Energy Harvesters with Increased Open-Circuit Voltage

Piezoelectric MEMS Energy Harvester for Low-Power Applications

An Ultra-Low Quiescent Current Power Management ASIC with MPPT for Vibrational Energy Harvesting

Current Reference with Temperature Compensation for Low Power Applications

A Fully Integrated Split-Electrode SSHC Rectifier for Piezoelectric Energy Harvesting

A 2.5-nA Area-Efficient Temperature-Independent 176-/82-ppm/°C CMOS-Only Current Reference in 0.11-$μ$m Bulk and 22-nm FD-SOI

A Passive Design Scheme to Increase the Rectified Power of Piezoelectric Energy Harvesters

A 30na Temperature-Independent CMOS Current Reference and Its Application in an LDO

Design of Low-Offset Low-Power CMOS Amplifier for Biosensor Application

Current Reference with Low Temperature Drift and Low Power Supply

Low-Temperature-Drift High PSRR CMOS Current Reference

A Low Power Bandgap Reference With Buffer Working In The Sub-Threshold Region For Energy Harvesting Systems

Self-powered piezoelectric energy harvesting with ultra-low power consumption for low-amplitude ambient vibrations

A Single-Input Multi-Output Piezoelectric Energy Harvesting System Combining with P-SSHI and Cold Startup Circuit