Abstract:Yttria-stabilized zirconia (YSZ)/gadolinia-doped ceria (GDC) dual-layered electrolytes have promising potential in solid oxide fuel cells (SOFCs) to prevent the destroying reaction of the lanthanum-containing cathode with ZrO2 base electrolyte and improve ionic conduction by blocking ceria based electrolyte electronic conduction. Preparation of the YSZ/GDC electrolyte is problematic due to the formation of a high electrical resistance interdiffusion layer at high sintering temperatures. Flash sintering (FS) is a promising method for sintering materials at low temperatures and short times. Herein, FS is used to limit the interdiffusion layer. The green dual-layered electrolytes are prepared by YSZ tape casting and coating the GDC layer on the binder-burnout YSZ layer by wet spraying method. The effect of electric field strength (E) and current density (J) on the interdiffusion layer thickness is investigated by the response surface methodology (RSM). The interdiffusion layer thickness in the electrolytes is determined using elemental distribution curves across the YSZ/GDC interface using a scanning electron microscope (SEM) equipped with an energy-dispersive X-ray spectrometer (EDS). Response surface of interdiffusion layer thickness shows that the electric field strength is more effective in the interdiffusion layer propagation than the current density. By controlling the electric field strength and current density, the interdiffusion layer is limited and descends from 45 µm for E = 300 V/cm and J = 200 mA/mm2 to 1 µm for E = 80 V/cm and J = 200 mA/mm2 as the optimum FS parameters. Electrochemical impedance spectroscopy (EIS) results show improved electrical conduction in optimal flash sintered electrolytes compared with conventionally sintered ones due to the thinner interdiffusion layer. The SOFC single cell is made using the optimal flash sintered YSZ/GDC electrolyte, which shows a performance of 0.3 W/cm2 at 800 °C, about 15% higher than the SOFC single cell made by conventionally sintered YSZ/GDC electrolyte.

Two-Layer Fuel Cell Electrolyte Structure by Sol-Gel Processing

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

YSZ Thin Films Prepared by a Novel Powder Coating Process on Porous NiO-YSZ Cermet

Solid oxide fuel cell with a spin-coated yttria stabilized zirconia/gadolinia doped ceria bi-layer electrolyte

Sputter-deposited medium-temperature solid oxide fuel cells with multi-layer electrolytes

Performance of a double-layer CGO/YSZ electrolyte for solid oxide fuel cells

Fabrication of an Anode-Supported Yttria-Stabilized Zirconia Thin Film for Solid-Oxide Fuel Cells Via Wet Powder Spraying

Fabrication of YSZ/SNDC Bilayer Electrolytes by Spark Plasma Sintering

Optimization of Porous YSZ Substrate in the Tri-layer Structure Solid Oxide Fuel Cell

Impedance analysis of thin YSZ electrolyte for low-temperature solid oxide fuel cells

Nanocrystal Engineering of Thin-Film Yttria-Stabilized Zirconia Electrolytes for Low-Temperature Solid-Oxide Fuel Cells

High Performance Solid Oxide Fuel Cells Based on Tri-Layer Yttria-Stabilized Zirconia by Low Temperature Sintering Process

Preparation of SDC Interlayer and Influence on Performances of Anode Supported Solid Oxide Fuel Cells

The fabrication technique of YSZ electrolyte film

Development of yttria-stabilized zirconia thin films via slurry spin coating for intermediate-to-low temperature solid oxide fuel cells

Fabrication, Microstructure and Properties of A Ysz Electrolyte for Sofcs

Fabrication and Characterisation of a Large-Area Solid Oxide Fuel Cell Based on Dual Tape Cast YSZ Electrode Skeleton Supported YSZ Electrolyte with Vanadate and Ferrite Perovskite-Impregnated Anode and Cathode

A Novel MgO Doped Zr0.92Y0.08O2-α(8YSZ) with NaCl/KCl Composite Electrolyte for Intermediate Temperature Fuel Cells

Controlling Yttria-stabilized zirconia/gadolinia-doped ceria interdiffusion layer in the solid oxide fuel cell electrolyte via flash sintering method

Fabrication of nanoscale yttria stabilized zirconia for solid oxide fuel cell

Fabrication of condense and thin YSZ electrolyte layer using novel thermal-assisted slurry spin coating method for IT-SOFC