Abstract:ASTRACT Electrodeposition of conformal and compact SnO 2 films on transparent conductive oxides (TCOs) has been hardly achieved thus limiting its application in fully solid solar cells such as those based in perovskite absorbers. Here are presented high-quality n-type semiconducting tin (VI) oxide (SnO 2 ) thin films, successfully grown using a hybrid potentiodynamic/potentiostatic approach on both ITO and FTO coated glass substrates after a detailed optimization that included both annealing steps between eletrodepositions. A solution chemistry study together with a spectrophotometric analysis was useful to determine the one-hour time window of stability for the chosen electrolyte as source of tin. Formation mechanisms based in thermodynamic data and accumulated mass measurements using an electrochemical quartz crystal microbalance (EQCM) are discussed. From the EQCM study the growth rate of films was also estimated in good agreement with high resolution transmission electron microscopy (HR-TEM) analysis. Field emission scanning electron microscopy (FE-SEM) images and X-ray diffraction (XRD) data revealed that substrates are well-covered, crystalline, conformal and free of defects ( e.g . without pinholes). The absence of these defects was also well supported by cyclic voltammetry measurements using the ferricyanide/ferrocyanide redox couple. XPS also confirmed the presence of Sn 4+ in optimized films. From the optical properties, after carefully eliminating the influence of oscillations due to interference, a direct bandgap energy at 3.60 eV can be deduced. Another indirect bandgap energy at 3.30 eV can also be possible. The hybrid potentiodynamic/potentiostatic protocol to prepare SnO 2 paves a way to prepare compact, transparent and well covering films suitable as electron transporting layer (ETL) for applications in both photoelectrochemical and solid-state solar cells.

Ohmic contacts on SnO2 produced by hydrogen plasma treatment

P-type Tin–indium Oxide Films Prepared by Thermal Oxidation of Metallic InSn Alloy Films

Effects of Surface Treatment on Non-alloyed Ti/Al Ohmic Contact of n-GaN

Electrodeposition of Sno2 Thin Films from Aqueous Tin Sulfate Solutions

Effect of hydrogen plasma treatment and oxygen deficiency on conducting properties of In$_2$O$_3$:Sn thin films

Investigation of the effect of short-term exposure of oxygen and hydrogen plasma on the composition and structure of thin tin dioxide films

Characterization of Individual SnO2 Nanobelts with STM

Indium Tin Oxide (ITO) based Ohmic Contacts on Bulk n-GaN Substrate

Surface modification of tin oxide nanowires through hydroxyl group anchoring

Controllable Preparation of SnO2 Solid Microsphere and Its Application in Electrical Contact Material

Influence of mechanochemical and microwave treatment of tin dioxide on porous structure and gas-sensitive properties of SnO2-based sensor nanomaterials

Formation Mechanisms of Low-Resistivity Ni∕Pt Ohmic Contacts to Li-Doped P-Type ZnO

Investigation of electrode-driven hydrogen plasma method for in situ cleaning of tin-based contamination

Effects of Hydrogen Plasma Treatment on the Electrical Behavior of Solution-Processed ZnO Thin Films

Effect of annealing on the properties of indium-tin-oxynitride films as ohmic contacts for gan-based optoelectronic devices

Plasma treatment to tailor growth and photoelectric performance of plasma-enhanced atomic layer deposition SnOx infrared transparent conductive thin films

Crystal and electronic structure engineering of tin monoxide by external pressure

Ti/Ni/Ti/Au Ohmic contact and Schottky transformation to Al-doped ZnO thin films

Low Schottky Barrier Contacts to 2H-Mos2 by Sn Electrodes

Low-resistivity Ni/Pt Ohmic contacts to p-type N-doped ZnO

Hybrid potentiodynamic/potentiostatic electrodeposition of thin and compact tin dioxide on indium tin oxide electrodes