Abstract:LiNixCoyMn1–x–yO2 (x ≥ 0.5) layered oxide materials are generally considered as one of the most prospective candidates for lithium-ion battery (LIBs) cathodes due to their high specific capacity and working voltage. However, surface impurity species substantially degrade the electrochemical performance of LIBs. Herein, surface reconstruction from layered structure to disordered layer and rock-salt coherent region together with a uniform Li2CO3-dominant coating layer is first in situ constructed on the single-crystal LiNi0.5Co0.2Mn0.3O2 (NCM) material by a simple water treatment procedure. The unique surface structure is elucidated by Ar-sputtering-assisted X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (spherical aberration-corrected-scanning transmission electron microscopy (STEM), high-resolution transmission electron microscopy (HRTEM), and TEM). Meanwhile, neutron powder diffraction (NPD) indicates that the antisite defect concentration is mitigated in the treated materials. The modified samples display superior cycle stability with a capacity retention of up to 87.5% at 1C after 300 cycles, a high rate capacity of 151 mAh g–1 at 5C, an elevated temperature (45 °C) cycling property with 80% capacity retention (4.5 V), and improved full-cell performance with 91% after 250 cycles at 1C. Importantly, postmortem examination on the cycled cathodes by time-of-flight secondary-ion mass spectroscopy (TOF-SIMS), XPS, TEM, and X-ray diffractometer (XRD) pattern further demonstrate that these results are mainly attributed to the thin cathode electrolyte interface (CEI) film and low solubility of transition-metal ions. Therefore, this expedition provides an opportunity to construct an effective armor for the interface compatibility and stability of LIBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c21973?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c21973</a>.XRD patterns and SEM images of NCM, NCM-350 °C, NCM-400 °C, and NCM-500 °C; HRTEM and STEM image of NCM; TEM images of NCM and NCM-400 °C cathode; EDS elemental mapping of the NCM cathode particle; XPS spectra of C 1s, O 1s, and Ni 2p for NCM and NCM-400 °C with different sputtering times (0, 5, 10, 20, 30, 60, 120, 180, 240 s); XPS spectra of Li 1s for NCM and NCM-400 °C surface; cycling performance of graphite at 0.5C at 25 °C within a voltage range of 0.01–3.0 V in a half cell against lithium anodes. Digital images of lithium harvested from the disassembled cycled cells after 500 cycles at 5C for NCM and NCM-400 °C. STEM-EDX, XPS spectra in an argon atmosphere, and SEM image of cycled NCM and NCM-400 °C (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c21973/suppl_file/am0c21973_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Determination of lithium and transition metals in Li1 Ni1/3 Co1/3 Mn1/3 O2 (NCM) cathode material for lithium-ion batteries by capillary electrophoresis

Monitoring the Formation of Nickel-Poor and Nickel-Rich Oxide Cathode Materials for Lithium-Ion Batteries with Synchrotron Radiation

Determination of Nickel, Cobalt and Manganese in cathode material of Lithium ion Batteries

Ton-scale preparation of single-crystal Ni-rich ternary cathode materials for high-performance lithium ion batteries

Single-Particle Elemental Analysis of μm-Sized Battery Materials by Laser Ablation Inductively Coupled Plasma Mass Spectrometry

Surface Analysis of the Lithium-Rich Cathode Material Li<sub>1.2</sub>Mn<sub>0.54</sub>Co<sub>0.13</sub>Ni<sub>0.13</sub>Na<sub><i>x</i></sub>O<sub>2</sub> by Advanced Electron Microscopy

Direct Multielement Analysis of Polydisperse Microparticles by Classification-Single-Particle ICP-OES in the Field of Lithium-Ion Battery Electrode Materials

Mn2+ or Mn3+ ? Investigating transition metal dissolution of manganese species in lithium ion battery electrolytes by capillary electrophoresis

Preparation of CeO2-coated Li1.2Mn0.54Co0.13Ni0.13O2 as cathode materials for Lithium Ion Batteries

Surface Analysis of the Lithium-Rich Cathode Material Li1.2Mn0.54Co0.13Ni0.13NaxO2 by Advanced Electron Microscopy

Development and understanding of the lithiation/de-lithiation mechanism of a low cobalt and nickel-rich cathode material for lithium‐ion batteries

A simple one-step molten salt method for synthesis of micron-sized single primary particle LiNi0.8Co0.1Mn0.1O2 cathode material for lithium-ion batteries

Fabrication and interfacial characterization of Ni-rich thin-film cathodes for stable Li-ion batteries

Lithium-Rich Nanoscale Li1.2mn0.54ni0.13co0.13o2 Cathode Material Prepared by Co-Precipitation Combined Freeze Drying (Cp-Fd) for Lithium-Ion Batteries

A short process and low-cost preparation of single crystal LiNi0.6Co0.2Mn0.2O2 cathode for lithium-ion batteries

Preparation and Electrochemical Properties of LiNi<sub>2/3</sub>Co<sub>1/6</sub>Mn<sub>1/6</sub>O<sub>2</sub> Cathode Material for Lithium-Ion Batteries

A multi-edge study: investigating Co oxidation states of pristine LiNi x Mn y Co 1-x-y O 2 cathode materials by high energy-resolution X-ray spectrometry

High Precision Coulometry Study of Lini0.5mn1.5o4/Li Coin Cells

Electrochemical Kinetics of the Li[Li0.23co0.3mn0.47]O-2 Cathode Material Studied by Gitt and Eis

In Situ Induced Surface Reconstruction of Single-Crystal Lithium-Ion Cathode Toward Effective Interface Compatibility

Combined Electron Paramagnetic Resonance and Atomic Absorption Spectroscopy/Inductively Coupled Plasma Analysis As Diagnostics for Soluble Manganese Species from Mn-Based Positive Electrode Materials in Li-ion Cells.