Abstract:Dissolution and migration of manganese from cathode to anode lead to severe capacity fading of Li2MnO4-carbon cells. Overcoming this major problem requires better understanding of the mechanism of manganese dissolution, migration, and deposition. Here, we apply a variety of advanced analytical methods to the study of LiMn2O4 cathodes cycled with different anodes. We provide solid evidence, for the first time, that oxidation state of manganese deposited on the anodes is +2, which differs from the results reported earlier. The results also suggest a metathesis reaction between Mn2+ and some species on the SEI during the deposition of Mn on the anodes, rather than a reduction reaction that leads to the formation of metallic Mn otherwise, as speculated in earlier studies. The capacity fading is caused by changing of the SEI on the graphite anode due to the continuous reaction with the dissolved Mn2+from the cathode. Suppressing the dissolution of Mn from the cathode is critical to reducing capacity fade of LiMn2O4–based cells. Therefore, we apply a nanoscale surface-doping approach to minimize Mn dissolution from LiMn2O4. This approach exploits advantages of both bulk doping and surface coating methods by stabilizing the surface crystal structure of LiMn2O4 through cationic doping while maintaining the bulk spinel LiMn2O4 structure, and protecting the bulk LiMn2O4 from electrolyte corrosion while maintaining ion and charge transport channels on the surface through the electrochemically active doping layer. As a consequence, the surface-doped LiMn2O4demonstrates significantly enhanced electrochemical performance in terms of cycleability and capacity at elevated temperature. This study provides encouraging evidence that surface doping could be a promising alternative to improve the cycling performance of lithium-ion batteries. On the anode side, we address a new perspective on solving Mn deposition issue: tuning the Mn deposition reaction instead of simply decreasing the concentration of Mn deposited on anode. We find that two commonly used electrolyte additives, fluorinated ethylene carbonate (FEC) and vinylene carbonate (VC), improve the cycle performance of the battery but surprisingly increase the concentration of Mn deposited on the anode. According to the ion-exchange model mentioned above, the increased amount of Mn2+ deposited on anode can be attributed to the increased amount of the Li+ ions in the additive modified SEI layers, as the Mn deposition can occur via the ion-exchange reaction between the Li+ in the SEI and the Mn2+ in the electrolyte. The improved cycle performance can be attributed to enhanced robustness of the SEI layers against the attack of Mn2+ ion from the electrolyte because of the sufficient amount of mobile Li+ in the SEI layer for the ion transport, which was confirmed by in-situ EIS measurements. This work sheds some new light on solving the capacity fade issue of the Mn-based Li ion batteries by manipulating the Mn-Li ion-exchange process rather than simply suppressing the deposition of Mn on anodes. Figure 1

Mn2+ or Mn3+ ? Investigating transition metal dissolution of manganese species in lithium ion battery electrolytes by capillary electrophoresis

Combined Electron Paramagnetic Resonance and Atomic Absorption Spectroscopy/Inductively Coupled Plasma Analysis As Diagnostics for Soluble Manganese Species from Mn-Based Positive Electrode Materials in Li-ion Cells.

Mn Dissolution and Migration in Mn-Based Lithium Ion Batteries: Fundamental Understanding and Protective Interphase Modifications

Manganese Dissolution from LiMn 2 O 4 Cathodes at Elevated Temperature: Methylene Methanedisulfonate As Electrolyte Additive

Understanding Degradation at the Lithium-Ion Battery Cathode/Electrolyte Interface: Connecting Transition-Metal Dissolution Mechanisms to Electrolyte Composition

Probing In Operando Manganese Dissolution and Associated Mechanical Deformation in LiMn 2 O 4 Cathodes

Overlooked Electrolyte Destabilization by Manganese (II) in Lithium-Ion Batteries

Mn(Ii) Deposition On Anodes And Its Effects On Capacity Fade In Spinel Lithium Manganate-Carbon Systems

Mn(II) Deposition on Anodes and Its Effect on Capacity Fade in Spinel LiMn2O4-Carbon System

Revealing the Functional Relationship Between Manganese Dissolution Potentials and Lithium Concentrations with Diffusion Coefficient for Lithium Intercalation in Λ-Mno2 Electrode

Chemical Composition and Formation Mechanisms in the Cathode-Electrolyte Interface Layer of Lithium Manganese Oxide Batteries from Reactive Force Field (reaxff) Based Molecular Dynamics

Enhanced LiMn2O4 Thin-Film Electrode Stability in Ionic Liquid Electrolyte: A Pathway to Suppress Mn Dissolution

Unraveling the Roles of Dissolved Mn(2+) and Its Impact on the Electrode–Electrolyte Interface under Realistic Conditions

Structural and electrochemical studies of α-manganese dioxide (α-MnO2)

Electrochemical lithium intercalation in nanosized manganese oxides

In-situ Synchrotron X-ray Absorption Studies of LiMn0.25Fe0.75PO4 As a Cathode Material for Lithium Ion Batteries

Preparation and Li + extraction/adsorption properties of lithium-rich manganese oxide in aqueous solution

Understanding Transition-Metal Dissolution Behavior in LiNi0.5Mn1.5O4 High-Voltage Spinel for Lithium Ion Batteries

First-Principles Simulations for the Surface Evolution and Mn Dissolution in the Fully Delithiated Spinel LiMn 2 O 4

Manganese Dissolution in alkaline medium with and without concurrent oxygen evolution in LiMn$_2$O$_4$

Operando characterization and regulation of metal dissolution and redeposition dynamics near battery electrode surface