Abstract:The main load-bearing structure of submarines is the pressure shell. Shell failures are usually caused by high hydrostatic pressure and its own potential geometric imperfections. This paper proposes a cylindrical shell with a strong corrugated stiffening structure. Two theoretically geometrically identical shells are fabricated using CNC machining to ensure the reproducibility and reasonableness of the results. Firstly, the point cloud data of all the geometric parameters of the corrugated pressure cylindrical shells were obtained using a 3D scanner. Geomagic Control X 3D inspection software was used to determine the geometric deviations of the shells. Geometric reconstruction was performed using Geomagic Design X reverse modeling software to capture potential imperfections of the shells. The aluminum shells were then welded and placed in the pressure chamber. Failure loads were obtained for all shells by constant water injection and pressurization. Considering the confined nature of the pressure chamber, a nonlinear finite element analysis of the corrugated pressure cylindrical shell was carried out using Abaqus/Riks, taking into account actual fabrication imperfections. Finally, the failure behavior of the shells under uniform external pressure was determined. The results show that both corrugated pressure cylindrical shells have high machining accuracy. The numerical simulation results of the critical buckling load of the corrugated pressure cylindrical shells were in good agreement with the test results. The corrugated structure has additional advantages in retarding the generation and expansion of shell surface defects. The equilibrium path of the corrugated pressure cylindrical shell can be maintained in a smooth and continuous state, showing stable buckling behavior. This study will provide new inspiration for the structural design and failure prediction of the submarine pressure shell.

An experimental and numerical investigation on ultimate strength of corrugated bulkheads and plane bulkheads subjected to lateral pressure

Internal Wind Pressures and Buckling Behavior of Large Cylindrical Floating-Roof Tanks under Various Liquid Levels

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

The influence of lateral pressure on ultimate strength of ship structure

Wind Loads and Wind-Resistant Behaviour of Large Cylindrical Tanks in Square-Arrangement Group. Part 2: CFD Simulation and Finite Element Analysis

Strength Differential Effect and Influence of Strength Criterion on Burst Pressure of Thin-Walled Pipelines

Experimental study on the failure modes of circumferentially corrugated cylinders under external hydrostatic pressure

The mechanical behavior of cylindrical shell with composite corrugations under uniform and concentrated pressure

Buckling performance of inner corrugated pressure shells under external hydrostatic pressure

Lightweight design and experimental investigation of codirectional corrugated steel fire bulkheads on a cruise ship

Failure Behavior of Corrugated Pressure Cylindrical Shells with Variable Wall Thickness under Uniform External Pressure

Stress distributions and stiffness anisotropy of circumferentially corrugated shells under uniform external pressure

Numerical Simulation Analysis on Buckling Load of Large Combined Cylindrical Shells

Experimental numerical and analytical analysis of the penetration of a scaled double-hull tanker side structure

Experimental and numerical investigations on the collapse behaviour of box type hull girder subjected to cyclic ultimate bending moment

Collapse behavior of corrugated stiffened pressure shells under external hydrostatic pressure considering actual fabrication imperfections: A reverse modeling technique

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Local buckling of deepwater oil-gas pipeline under high hydrostatic pressure

Ultimate Shear Resistance and Post-Ultimate Behavior of Double-Corrugated-plate Shear Walls

Structural Characteristics of Corrugated Steel Inner Walls in Liquefied Natural Gas Ship Membrane Compartments

Experimental and numerical investigation on the ultimate strength of a ship hull girder model with deck openings