Abstract:The current research of hydrodynamic bearing in blood pump mainly focuses on the bearing structure design.Compared with the typical plane slider bearing and Rayleigh step bearing,spiral groove bearing has excellent performance in load-carrying capacity.However,the load-carrying capacity would decrease significantly with increasing flow rate in conventional designs.In this paper,the special treatment is made to the upper spiral groove bearing to make sure that both the circulatory flowing and load-carrying capacity are high.Three-dimensional computational fluid dynamics（CFD） models in the space between rotor and shaft are developed by using FLUENT software.Effects of groove number,film height and groove depth on load-carrying capacity of the spiral groove bearings are investigated by orthogonal experiment design.The experimental results show that film height is the most remarkable factor to the load-carrying capacity.The variation tendency of load-carrying capacity reveals that the best combination of geometry is the one with groove number of 8,film height 0.03 mm and groove depth 0.08 mm.The velocity and pressure distributions in spiral groove bearings are also analyzed,and the analysis result shows that the distributions are in conformity with the design of the blood pump based on the principle of hydrodynamic bearing.The displacement of the rotor with the best combination parameters is tested by using laser displacement sensors,the testing result shows that the suspending performance is satisfactory both in axial and radial directions.This research proposes a bearing design method which has sufficient load-carrying capacity to support rotor as an effective passive hydrodynamic bearing.

A passive compensated method with hydraulic transmission for static infinite stiffness of thrust bearing

Investigation on lubrication characteristics and deformation control of hydrostatic bearing workbench

Research on the supporting mechanism of internal feedback hydrostatic hybrid bearing considering flow rate correction

Inclination angle effect of tribological performance for hydrostatic bearing having tilting oil pad under variable viscosity conditions

Experimental and Numerical Analysis of a Self-Circulating Oil Bearing System for Gear Pumps

Numerical Simulation and Experimental Research on Passive Hydrodynamic Bearing in a Blood Pump

Lubrication and stability analysis of nonlinear rotor-bearing system

Effects of oil recess structural parameters on comprehensive tribological properties in multi-pad hydrostatic thrust bearing for CNC vertical processing equipment based on low power consumption

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Dynamic properties of a hydrostatic bearing system

Nonlinear Control System Design for Active Lubrication of Hydrostatic Thrust Bearing

A novel transient computational fluid dynamics-fluid–structure interaction model for the pad adaptive motion and rotordynamic coefficients of hybrid porous tilting pad bearings

Transient Thermo-Elasto-hydrodynamic Analysis of a Bidirectional Thrust Bearing in Start-Up and Shutdown Processes

Exploring magnetic properties and dynamic performance of magnetic-hydraulic double-floating journal bearing based on offset load

CFD analysis for static and dynamic characteristics of hydrodynamic thrust bearings

Analysis of lubrication characteristics of dynamic-static pressure hybrid thrust bearing considering key factors under eccentric loads

OPTIMAL METHODS OF THE DYNAMIC PROPERTIES IN A HYDROSTATIC BEARING SYSTEM

Theoretical and Experimental Study on the Static and Dynamic Characteristics of Tilting-Pad Thrust Bearing

Tehd Analysis Of A Bidirectional Thrust Bearing In A Pumped Storage Unit

Effects of support structure on lubricating properties of bi-directional thrust bearings

Transient TEHD Analysis of a Thrust Bearing Based on Two-Way Fluid-Solid-Thermal Interaction