Abstract:Purpose For moderate pressure and high pressure gear pumps, the temperature failure problem of bearings is now of considerable concern because of their heavy loads. However, the compact structure and the efficiency consideration make it extremely difficult to improve the bearing cooling. A self-circulating oil bearing system is developed for gear pumps with self-lubricating bearings to solve this problem. The oil is aspirated in from the low pressure chamber of the gear pump and discharged to the same chamber by using the pressure difference in the journal bearing, thus achieving the self-circulation. Design/methodology/approach An experiment test rig has been built for the feasibility study. The oil flow rate under different speeds has been recorded. Furthermore, the temperatures of the bearings with or without the oil circulation have been compared. Additionally, the oil flow in the test rig has been simulated using computational fluid dynamics codes. Findings The experimental and numerical results agree well. The experimental results indicate that the oil flow rate increases approximately linearly with the speed and the bearing temperature can be lowered successfully. The calculation results indicate that the bearing load capacity is nearly the same. Both the experimental and numerical studies establish that the self-circulating oil bearing system works successfully. Originality value As far as the authors know, it is the first time to find that the self-circulation can be built using the pressure difference in the bearing oil film, and this principle can be applied in the cooling and lubrication of the gear pumps to solve the temperature failure problem.

Research on the supporting mechanism of internal feedback hydrostatic hybrid bearing considering flow rate correction

Lubrication Performance Analysis of Lead-Bismuth Internal-Feedback Bearings in the Nuclear Main Pump System

Research on the Support Performance of Internal Feedback Hydrostatic Thrust and Journal Bearing Considering Load Effect

Performance Analysis and Restrictor Structure Improvement of an Internal Feedback Hydrostatic Turntable Oil Pad Considering Internal Flow

Performance of Flat Capillary Compensated Deep/Shallow Pockets Hydrostatic/Hydrodynamic Journal-Thrust Floating Ring Bearing

Experimental and Numerical Analysis of a Self-Circulating Oil Bearing System for Gear Pumps

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Analysis of Fluid-Thermal Coupling in Ferrofluid Bearing Used in High Speed Machines

Theoretical and Experimental Study on Dynamic Coefficients and Stability for a Hydrostatic/Hydrodynamic Conical Bearing

Theoretical and Experimental Results of Water-Lubricated, High-Speed, Short-Capillary-Compensated Hybrid Journal Bearings

A Thermohydrodynamic Analysis of the Self-Lubricating Bearings Applied in Gear Pumps Using Computational Fluid Dynamics Method

Effect of design parameters and operational conditions on the motion accuracy of hydrostatic thrust bearing

Investigation on lubrication characteristics and deformation control of hydrostatic bearing workbench

Study on the Static Performance and Stability of a Water-Lubricated Hybrid Bearing with Circumferential Grooves and Stepped Recesses Considering the Influence of Recess Sizes

Study on the friction characteristic of a water-lubricated hybrid bearing

Inclination angle effect of tribological performance for hydrostatic bearing having tilting oil pad under variable viscosity conditions

Dynamic properties of a hydrostatic bearing system

Exploring magnetic properties and dynamic performance of magnetic-hydraulic double-floating journal bearing based on offset load

Design of a Hydrostatic Spindle and Its Simulation Analysis with the Application to a High Precision Internal Grinding Machine

Investigation on the Lubrication Regimes and Dynamic Characteristics of Hydro-Hybrid Bearing of Two-Circuit Main Loop Liquid Sodium Pump System

Composite thermal oil film lubrication model for hybrid journal bearings