Abstract:The technological and metallurgical requirements of material for highgradient superconducting cavities are described. High-purity niobium, as the preferred metal for the fabrication of superconducting accelerating cavities, should meet exact specifications. The content of interstitial impurities such as oxygen, nitrogen, and carbon must be below 10{\mu}g/g. The hydrogen content should be kept below 2{\mu}g/g to prevent degradation of the Q-value under certain cool-down conditions. The material should be free of flaws (foreign material inclusions or cracks and laminations) that can initiate a thermal breakdown. Defects may be detected by quality control methods such as eddy current scanning and identified by a number of special methods. Conventional and alternative cavity fabrication methods are reviewed. Conventionally, niobium cavities are fabricated from sheet niobium by the formation of half-cells by deep drawing, followed by trim machining and Electron-Beam Welding (EBW). The welding of half-cells is a delicate procedure, requiring intermediate cleaning steps and a careful choice of weld parameters to achieve full penetration of the joints. The equator welds are particularly critical. A challenge for a welded construction is the tight mechanical and electrical tolerances. These can be maintained by a combination of mechanical and radio-frequency measurements on halfcells and by careful tracking of weld shrinkage. The established procedure is suitable for large series production. The main aspects of quality assurance management are mentioned. Another cavity fabrication approach is slicing discs from the ingot and producing cavities by deep drawing and EBW. Accelerating gradients at the level of 35-45 MV.m-1 can be achieved by applying Electropolishing (EP) treatment....

Characterization of Additive Manufacturing Materials for String Assembly in Cleanroom

Application Of The ASME Boiler And Pressure Vessel Code In The Design Of SSR Cryomodule Beamlines For PIP-II Project At Fermilab

Fabrication experience of the pre-production PIP-II SSR2 cavities at Fermilab

Final Design of the Production SSR1 Cryomodule for PIP-II Project at Fermilab

Particle radiation effects on shape memory alloy couplers for ultra-high vacuum sealing: a preliminary study

Low Particulates Nitrogen Purge and Backfill During Prototype HB650 Cryomodule String Assembly

Sub-THz Characterization of Technical Surfaces for Particle Accelerator Vacuum Chambers

Plasma Cleaning of LCLS-II-HE verification cryomodule cavities

Laser Powder Bed Fusion: A Review on the Design Constraints

Mechanical Design of a High Energy Beam Absorber for the Advanced Superconducting Test Accelerator (ASTA) at Fermilab

Measurement of precision and quality characteristics of lattice structures in metal-based additive manufacturing using computer tomography analysis

Impact of Surface Finishing on Ti6Al4V Voronoi Additively Manufactured Structures: Morphology, Dimensional Deviation, and Mechanical Behavior

Design and prototyping wire arc additively manufactured aluminum alloy lattice structures

Electron beam powder bed fusion of Ti-6Al-2Sn-4Zr-2Mo lattice structures: morphometrical and mechanical characterisations

Qualification Pathways for Additively Manufactured Components for Nuclear Applications

Prototyping and characterisation of 316L stainless steel parts and lattice structures printed via metal fused filament fabrication

Design, Manufacturing, Assembly, and Lessons Learned of the Pre-production 325 MHz Couplers for the PIP-II Project at Fermilab

Improving the beam quality of the low-energy muon beamline at Paul Scherrer Institute: Characterization of ultrathin carbon foils

Depth-Resolved Characterization of Centrifugal Disk Finishing of Additively Manufactured Inconel 718

SRF Cavity Fabrication and Materials

Niobium to Titanium Electron Beam Welding for SRF Cavities