Abstract:The technological and metallurgical requirements of material for highgradient superconducting cavities are described. High-purity niobium, as the preferred metal for the fabrication of superconducting accelerating cavities, should meet exact specifications. The content of interstitial impurities such as oxygen, nitrogen, and carbon must be below 10{\mu}g/g. The hydrogen content should be kept below 2{\mu}g/g to prevent degradation of the Q-value under certain cool-down conditions. The material should be free of flaws (foreign material inclusions or cracks and laminations) that can initiate a thermal breakdown. Defects may be detected by quality control methods such as eddy current scanning and identified by a number of special methods. Conventional and alternative cavity fabrication methods are reviewed. Conventionally, niobium cavities are fabricated from sheet niobium by the formation of half-cells by deep drawing, followed by trim machining and Electron-Beam Welding (EBW). The welding of half-cells is a delicate procedure, requiring intermediate cleaning steps and a careful choice of weld parameters to achieve full penetration of the joints. The equator welds are particularly critical. A challenge for a welded construction is the tight mechanical and electrical tolerances. These can be maintained by a combination of mechanical and radio-frequency measurements on halfcells and by careful tracking of weld shrinkage. The established procedure is suitable for large series production. The main aspects of quality assurance management are mentioned. Another cavity fabrication approach is slicing discs from the ingot and producing cavities by deep drawing and EBW. Accelerating gradients at the level of 35-45 MV.m-1 can be achieved by applying Electropolishing (EP) treatment....

Niobium to Titanium Electron Beam Welding for SRF Cavities

Nanojoint Formation Between Ceramic Titanate Nanowires and Spot Melting of Metal Nanowires with Electron Beam

The Rise of Ingot Niobium as a Material for Superconducting Radiofrequency Accelerating Cavities

SRF Cavity Fabrication and Materials

Metallurgical and Technological Request for High Purity Niobium in SRF Application

Electron Beam Welding and Post Heat Treatment of a New Near-Beta High-Strength Ti-4Al-5Mo-5V-5Cr-1Nb Alloy

Fabrication of Nbti Superconducting Joint by Electromagnetic Forming Method

Industrial Fabrication of Medium-Beta SCRF Cavities for a High-Intensity Proton Linac

Superconducting niobium cavities of improved thermal conductivity

RRR Characteristics for SRF cavities

Electron Beam Melting of Niobium Alloys from Blended Powders

Medium grain niobium SRF cavity production technology for science frontiers and accelerator applications

Fabrication of the Cu/AgCuTi/Nb composite for superconducting radio-frequency material under extreme service conditions based on electroplating additive manufacturing

Demonstration of Niobium Tin in 218 MHz Low-beta Quarter Wave Accelerator Cavity

Microstructural Refinement of Niobium for Superconducting RF Cavities

Medium-Grain Niobium SRF Cavity Production Technology for Science Frontiers and Accelerator Applications

Dissimilar Laser Beam Welding of Titanium to Stainless Steel Using Pure Niobium as Filler Material in Lap Joint Configuration

Feasibility Study on SRF Cavity Improvement by Doping Method

Apparatus and method for plasma processing of SRF cavities

High-Strength Dissimilar Welds Between a NiTi Shape Memory Alloy and Titanium Obtained by Intermixing Niobium Using Pulsed Laser Beam Welding

Muon spin rotation studies of niobium for superconducting rf applications