Abstract:In inertial confinement fusion, the sub-atmospheric purging through microcapillaries is of great importance to the high gas purity inside the cryogenic target and the low failure rate of experiments. In this study, a non-continuous flow model is developed for this sub-atmospheric purging process and verified through National Ignition Facility experiments to study the evolution of parameters such as pressure and gas composition that are not possible to measure directly. The effects of microcapillary structures and sizes on the transient evacuation–filling behaviors are analyzed, and the periodic purging scheme is optimized. The results show that the extension of evacuation and filling time caused by the elongated microtube can be described as a linear function of microtube length or an exponential decay function of microtube diameter, and the change of the inner diameter has a more drastic effect. The conical-straight composite can effectively reduce the evacuation and filling time while meeting the thermal and mechanical requirements. The overall performance of the purging process exhibits a strong dependence on the cycle trough pressure. The total purging time firstly decreases and then increases with the increase in the trough pressure, and the optimal trough pressure falls at around 20% of the filling pressure where the evacuation and filling times are almost evenly balanced. These results can provide theoretical guidance for the selection of microtubes and the design of the filling–evacuating scheme in the experiments.

Low Particulates Nitrogen Purge and Backfill During Prototype HB650 Cryomodule String Assembly

Performance Analysis and Optimization of Sub-Atmospheric Purging through Microcapillaries in an ICF Cryogenic Target

Pressure safety approach for PIP-II cryogenic distribution system and cryomodules

PIP-II Linac Cryogenic Distribution System Design Challenges

Characterization of Additive Manufacturing Materials for String Assembly in Cleanroom

Design of Muon Campus full flow purifier for varying operational conditions and horizontal shipping

Optimization of cleaning technique for mitigating particulate contamination upon final optics assemblies

Performance of PIP-II High-beta 650 Cryomodule After Transatlantic Shipping

Instrumentation, Field Network and Process Automation for the Cryogenic System of the LHC Test String

Structural Design for ITER Gas Injection System Gas Fueling Gas Valve Box

Application Of The ASME Boiler And Pressure Vessel Code In The Design Of SSR Cryomodule Beamlines For PIP-II Project At Fermilab

Demonstration of Liquid Nitrogen Wicking Using a Multi-Layer Metallic Wire Cloth Laminate

Experimental and Numerical Investigation of Stratification and Self pressurization in a High Pressure Liquid Nitrogen Storage Tank

Quench Performance of the First Pre-series AUP Cryo-assembly

THE STATUS OF THE ULTRA-HIGH VACUUM SYSTEM OF HIRFL-CSR

Installation, commissioning, and testing of the HB650 CM at PIP2IT

Proton Improvement Plan II Cryogenic Distribution System thermodynamic design

Experimental investigation on the discharge and suction gas performance in the multilayer insulation microchannels

The Design and Analysis of a Containment Vacuum and Pressure Vessel System

Conservation of Helium while Maintaining High System Purity