Abstract:Thermohydraulic analysis of postulated accidents will identify system responses to accident scenarios and aid in developing design of safety systems and strategies to prevent or mitigate accident propagation. This paper reports analyses of four accident scenarios of a fusion DEMO reactor based on water-cooled ceramic-pebble breeder blanket. The accidents analyzed, which were selected based on the previous logical accident analysis, are ex-vessel loss of coolant of the primary cooling system, in-vessel loss of coolant of the first wall (FW) cooling pipes, loss of coolant in blanket modules, and loss of vacuum. The analyses have identified thermohydraulic responses of the DEMO systems to these accidents, pressure loads to confinement barriers for radioactive materials. Effectiveness of the safety systems and the integrity of the primary and final (secondary) confinement barriers against the accidents are discussed. As for the final confinement barrier, we show for the first time that implementation of a pressure suppression system (PSS) to the cooling system vault and a vacuum breaker to the tokamak pit is effective in significantly keeping the integrity of the final confinement barrier against the ex-vessel loss-of-coolant and loss-of-vacuum accidents, respectively. As for the primary confinement barrier, we show for the first time that limitation of the number of blankets from which a helium purge gas line collects the bred tritium will be a key technical issue to prevent propagation of loss of coolant in a blanket box through the purge gas line and then suppress the pressurization of the vacuum vessel (VV). For the in-vessel loss of coolant of the FW cooling pipes, further optimization of the PSS or design solutions regarding in-vessel components and plasma control will be necessary to decrease the pressure load to the VV and ensure the integrity of the primary confinement barrier.

The Design and Analysis of a Containment Vacuum and Pressure Vessel System

Design and Testing of an Explosively Loaded Pressure Vessel System for Proton Radiography

A Deep-Sea Large-Volume High-Pressure Simulation System—design, Analysis and Experimental Verification

Containment Tests and Analysis of Soft Wall Casing Fabricated by Wrapping Kevlar Fabric Around Thin Metal Ring

Numerical Simulation and Measurements of Reaction Load for an Impulsively Loaded Pressure Vessel

High pressure gas vessels for neutron scattering experiments

Thermohydraulic Analysis of Accident Scenarios of a Fusion DEMO Reactor Based on Water-Cooled Ceramic Breeder Blanket: Analysis of LOCAs and LOVA

Instability Analysis and Development of High Pressure Hydrogen Storage Vessels

Proposal of Integrated Test Facility for in-Vessel Thermofluid Safety of Fusion Reactors

Studies on Source Effect in Experimental Design for Passive Cooling in Large Cavities under LOCA Conditions

Dynamic Burst Pressure of Cylindrical Explosion Containment Vessels

Effects of Structural Dimensions and Material Properties on the Blast Loading and Dynamic Elastic Response of Containment Vessels

Containment for the Low-Temperature District Nuclear-Heating Reactor

Interactive Mechanisms Between the Internal Blast Loading and the Dynamic Elastic Response of Spherical Containment Vessels

Methods For Design Of Explosion Containment Vessels

Structural Design for ITER Gas Injection System Gas Fueling Gas Valve Box

Advanced Computer Analyst

Experimental investigation on multilayered explosion containment vessels

Scheme Design of Xenon Composite Over-wrapped Pressure Vessel for Electric Propulsion System

Neutronics Analysis of the ITER In-Vessel Viewing System

Nuclear analysis and shielding optimisation in support of the ITER In-Vessel Viewing System design