Abstract:The Short Baseline Near Detector (SBND) is one of three liquid argon (LAr) neutrino detectors sitting in the Booster Neutrino Beam (BNB) at Fermilab as part of the Short Baseline Neutrino (SBN) program. The detector is in a cryostat holding 260-ton of LAr and consists of four 2.5 m (L) $\times$ 4 m (W) Anode Plane Assembles (APAs) and two Cathode Plane Assemblies (CPAs), which leads to 11,264 Time Projection Chamber (TPC) readout channels and two separate 2 m long drift regions. As an enabling technology, Cold Electronics (CE) developed for cryogenic temperature operation makes possible an optimum balance among various design and performance requirements for such large sized detectors. Brookhaven National Laboratory (BNL) has been leading the R&D and implementation of the entire front-end CE system for LAr TPC readout in collaboration with other SBND institutes. The front-end readout electronics system includes the cold front-end electronics placed close to the wire electrodes, which detects and digitizes the charge signal in LAr, as well as the warm interface electronics placed on the signal feed-through flange outside of the cryostat, which further organizes and transmits the digitized signal to the DAQ system. An extensive study of electronics suitable for 77 K - 300 K, including the custom designed front-end ASIC and commercial components, e.g. ADC and FPGA, has been made to meet requirements such as low noise, low power consumption, high reliability and long lifetime. Furthermore, an integral design concept of APA, CE, feed-through, warm interface electronics with local diagnostics, grounding and isolation rules has been practiced with vertical slice test stands to make projection of the CE performance in the SBND detector.

Advanced Computer Analyst

An Overview of the Spallation Neutron Source Project

FOR A PHOTO-NEUTRON SOURCE DRIVEN BY 15 MeV ELECTRON LINAC

Design and Development of the Control System for a Compact Carbon-14 AMS Facility

The Overview of the National Ignition Facility Distributed Computer Control System

Management of a Large Distributed Control System Development Project

The new Cold Neutron Chopper Spectrometer at the Spallation Neutron Source - Design and Performance

Resonance Control Cooling System for a Proto-Type Coupled Cavity Linac

Dynamic systems modeling of the spallation neutron source cryogenic moderator system to optimize transient control and prepare for power upgrades

The accelerator control system of CSNS

Physical Design of the Target Station and Spectrometers for a Spallation Neutron Source

SNS LLRF Control System Model Design

Analysis and Synthesis of the SNS Superconducting RF Control System

Physical design of an Atmospheric Neutron Irradiation Spectrometer at China Spallation Neutron Source

Preliminary Design of CSNS-II Linac SRF LLRF

Data Acquisition System for CSNS Neutron Beam Monitor

A Conceptual Design of the Readout System for a Neutrino Experiment at SNS

A Conceptual Design of the Readout System for the Neutrino Experiment at Sns

Testing and Implementation Progress on the Advanced Photon Source (APS) Linear Accelerator (Linac) High-Power S-band Switching System

Design and development of the CSNS ion source control system

Low Noise Cold Electronics System for SBND LAr TPC