Abstract:The Spallation Neutron Source (SNS) is being designed, constructed, installed and commissioned by the staff of six national laboratories, Argonne National Laboratory, Brookhaven National Laboratory, Jefferson National Accelerator Laboratory, Lawrence Berkeley National Laboratory, Los Alamos National Laboratory, and Oak Ridge National Laboratory. The accelerator systems are designed to deliver a 695 ns proton-pulse onto a mercury target at a 60-Hz repetition rate and an average power of 2-MW. Neutron moderators that will convert the spallation neutrons into slow neutrons for material science research will surround the target. The Front-End systems are designed to generate an H- beam of minipulses, 68% beam on, 32% beam off every 965 ns, at 2.5 MeV for 1 ms, 60 times a second. The Front-End systems include a RF driven, volume-production ion source, beam chopping system, RFQ, and beam transport. The ion source will have to achieve about 65 mA to deliver 52 mA at the input to the linac. The linac consists of a drift tube linac up to 86.8 MeV, a coupled-cell linac to 185 MeV, and a superconducting RF linac to the nominal energy of 1 GeV. The design of the superconducting section includes 11 cryomodules with three, 0.61-beta cavities per cryomodule and 17 cryomodules with four, 0.81-beta cavities per cryomodule, with space to install four more 0.81-beta cryomodules. The accumulator ring is designed for charge exchange injection at full energy. The peak charge per bunch at the end of the accumulation cycle will reach 2.08x10**14 for 2-MW operation. The goal is to control beam losses to less than 1x10**-4.

Management of a Large Distributed Control System Development Project

Advanced Computer Analyst

An Overview of the Spallation Neutron Source Project

From microscopic to macroscopic dynamics in mean-field theory: effect of neutron skin on fusion barrier and dissipation

How to Commission, Operate and Maintain a Large Future Accelerator Complex from Far Remote

Dynamic systems modeling of the spallation neutron source cryogenic moderator system to optimize transient control and prepare for power upgrades

The accelerator control system of CSNS

Use of EPICS for High-Level Control of SNS Conventional Facilities

Testing and Implementation Progress on the Advanced Photon Source (APS) Linear Accelerator (Linac) High-Power S-band Switching System

The EPICS control system for IsoDAR

The Overview of the National Ignition Facility Distributed Computer Control System

Physics Design of an Accelerator for an Accelerator-Driven Subcritical System

Decision Support System for the APS Control System

THE ESS SUPERCONDUCTING LINEAR ACCELERATOR

Integrated Information Management for TESLA

A Prototype Compact Accelerator Driven Neutron Source for Canada Supporting Medical and Scientific Applications

Hardware Aspects, Modularity and Integration of an Event Mode Data Acquisition and Instrument Control for the European Spallation Source (ESS)

Targetry Challenges at Megawatt Proton Accelerator Facilities

Excess RF Power Required for RF Control of the Spallation Neutron Source (SNS) Linac, a Pulsed High-Intensity Superconducting Proton Accelerator

A Relational Database Model for Managing Accelerator Control System Software At Jefferson Lab

The Compact Pulsed Hadron Source: A Design Perspective