Abstract:CERN's Linac4 is a 160 MeV linear accelerator currently under construction. It will inject negatively charged hydrogen ions into CERN's PS-Booster. Its ion source is a noncesiated rf driven H(-) volume source directly inspired from the one of DESY and is aimed to deliver pulses of 80 mA of H(-) during 0.4 ms at a 2 Hz repetition rate. The Superconducting Proton Linac (SPL) project is part of the luminosity upgrade of the Large Hadron Collider. It consists of an extension of Linac4 up to 5 GeV and is foreseen to deliver protons to a future 50 GeV synchrotron (PS2). For the SPL high power option (HP-SPL), the ion source would deliver pulses of 80 mA of H(-) during 1.2 ms and operate at a 50 Hz repetition rate. This significant upgrade motivates the design of the new water cooled plasma generator presented in this paper. Its engineering is based on the results of a finite element thermal study of the Linac4 H(-) plasma generator that identified critical components and thermal barriers. A cooling system is proposed which achieves the required heat dissipation and maintains the original functionality. Materials with higher thermal conductivity are selected and, wherever possible, thermal barriers resulting from low pressure contacts are removed by brazing metals on insulators. The AlN plasma chamber cooling circuit is inspired from the approach chosen for the cesiated high duty factor rf H(-) source operating at SNS.

Proton Improvement Plan II Cryogenic Distribution System thermodynamic design

Overview and status of the PIP-II cryogenic system

Warm Compressor system Overview and status of the PIP-II cryogenic system

Pressure safety approach for PIP-II cryogenic distribution system and cryomodules

PIP-II Linac Cryogenic Distribution System Design Challenges

Thermodynamic Analyses of the LCLS-II Cryogenic Distribution System

Optimization of Superconducting Linac for Proton Improvement Plan-II (PIP-II)

Final Physics Design of Proton Improvement Plan-II At Fermilab

PIII Project Overview and Status

Performance of a Pulse Tube Cryocooler with Two Separate Stages using 3He in the Second Stage

Installation, commissioning, and testing of the HB650 CM at PIP2IT

PIP-II SSR2 Cavities Fabrication and Processing Experience

Cryogenic Distribution System Design for Cryomodules and Cavities Test in HIAF Project

Radiation Shielding Analysis for the PIP-II Linac at Fermilab

PIP2-BD: GeV Proton Beam Dump at Fermilab's PIP-II Linac

STATUS OF THE SUPERCONDUCTING PROTON LINAC (SPL) CRYO- MODULE

LLRF System for the Fermilab PIP-II Superconducting LINAC

Fabrication experience of the pre-production PIP-II SSR2 cavities at Fermilab

Numerical modelling of the cool-down of the helium transfer-lines for FRIB LINAC and experimental systems

Final Design of the Production SSR1 Cryomodule for PIP-II Project at Fermilab

High duty factor plasma generator for CERN's Superconducting Proton Linac