Abstract:Wafer‐scale deposition of high‐κ gate dielectric on 2D materials is crucial for applications in nano‐electronics, and antimony trioxide (Sb2O3) has shown promising results. It is shown that the choice of contact is critical, as the chemistry at the Sb2O3/contact interface dictates the dielectric performance. Using Ti and Au as contacts, transmission electron microscopy analysis reveals that Ti scavenges oxygen from the Sb2O3, while this interfacial reaction is completely absent for Au contacts. Wafer‐scale deposition of high‐κ gate dielectrics compatible with atomically thin van der Waals layered semiconductors (e.g., MoS2, WS2, WSe2) is urgently needed for practical applications of field effect transistors based on 2D materials. A study on a high‐κ molecular crystal antimony trioxide (Sb2O3) gate dielectric examined the role of electrode material on dielectric degradation and breakdown. It is demonstrated that the thin films of Sb2O3 can be uniformly deposited on a wafer scale. The current–voltage (I–V) curves show tightly controlled distributions of both leakage current and breakdown voltage. Electrical measurements reveal that defects are generated gradually upon electrical stressing. The evaluation of degradation is based on charge trapping, stress‐induced leakage current, and dielectric breakdown measurements. The breakdown voltage distribution follows a tight monomodal Weibull distribution suggesting a high quality of the film. Comparing Ti and Au as gate electrodes, both the breakdown field and the tunnel current are affected by the choice of electrode material. Transmission electron microscopy reveals that the chemistry at the electrode/Sb2O3 interface plays an important role and that Ti scavenges oxygen from the Sb2O3, forming a defective oxide layer at the Ti/Sb2O3 interface. For the Au electrode, this interfacial reaction is completely absent, improving the dielectric performance.

Towards metal electrode interface scavenging of rare-earth scandates: A Sc2O3 and Gd2O3 study

High-k gadolinium scandate on Si obtained by high pressure sputtering from metal targets and in-situ plasma oxidation

Optimization of scandium oxide growth by high pressure sputtering on silicon

Scavenging effect on plasma oxidized Gd$_2$O$_3$ grown by high pressure sputtering on Si and InP substrates

Gadolinium scandate by high-pressure sputtering for future generations of high-k dielectrics

High Pressure Sputtering For Kigh-k Dielectric Deposition. Is It Worth Trying?

On the chemical interaction of nanoscale lanthanum doped strontium titanates with common scandium and yttrium stabilized electrolyte materials

Atomic Layer Deposition Of Sc2o3 For Passivating Algan/Gan High Electron Mobility Transistor Devices

Electrodeposited SiO2 film: a promising interlayer of a highly active Ti electrode for the oxygen evolution reaction

Interface Engineering for Atomic Layer Deposited Alumina Gate Dielectric on SiGe Substrates.

Electrical characterization of gadolinium oxide deposited by high pressure sputtering with in situ plasma oxidation

Unraveling the Mechanism of Remote Scavenging Effect at the InP/Al 2 O 3 Interface Induced by Titanium Layer

Chemical/Structural Nanocharacterization and Electrical Properties of ALD-Grown La[sub 2]o[sub 3]∕si Interfaces for Advanced Gate Stacks

Optimization of gadolinium oxide growth deposited on Si by high pressure sputtering

Electrical and Structural Properties of Ternary Rare-Earth Oxides on Si and Higher Mobility Substrates and their Integration as High-k Gate Dielectrics in MOSFET Devices

Al$_3$Sc thin films for advanced interconnect applications

Engineering High- K/sige Interface with ALD Oxide for Selective GeO X Reduction.

Study of the interfaces in resistive switching NiO thin films deposited by both ALD and e-beam coupled with different electrodes (Si, Ni, Pt, W, TiN)

In-situ dielectric Al2O3/\b{eta}-Ga2O3 Interfaces Grown Using Metal-organic Chemical Vapor Deposition

Electrodes for High‐κ Molecular Crystal Antimony Trioxide Gate Dielectrics for 2D Electronics

Study of Interfacial Oxide Layer of LaAlO 3 Gate Dielectrics on Si for Metal–insulator–semiconductor Devices