Abstract:The microdisplays for augmented reality and virtual reality require ultrasmall micro light-emitting-diodes (μLEDs) with a dimension of ≤5 μm. Furthermore, the microdisplays also need three kinds of such μLEDs each emitting red, green, and blue emission. Currently, in addition to a great challenge for achieving ultrasmall μLEDs mainly based on III-nitride semiconductors, another fundamental barrier is due to an extreme difficulty in growing III-nitride-based red LEDs. So far, there has not been any effective approach to obtain high indium content InGaN as an active region required for a red LED while maintaining high optical performance. In this paper, we have demonstrated a selective epitaxy growth approach using a template featuring microhole arrays. This allows us to not only obtain the natural formation of ultrasmall μLEDs but also achieve InGaN with enhanced indium content at an elevated growth temperature, at which it is impossible to obtain InGaN-based red LEDs on a standard planar surface. By means of this approach, we have demonstrated red μLEDs (at an emission wavelength of 642 nm) with a dimension of 2 μm, exhibiting a high luminance of 3.5 × 10<sup>7</sup> cd/m<sup>2</sup> and a peak external quantum efficiency of 1.75% measured in a wafer form (i.e., without any packaging to enhance an extraction efficiency). In contrast, an LED grown under identical growth conditions but on a standard planar surface shows green emission at 538 nm. This highlights that our approach provides a simple solution that can address the two major challenges mentioned above.

InGaN-Based Orange-Red Resonant Cavity Light-Emitting Diodes

Emission Dynamics of GaN-based Blue Resonant-Cavity Light-Emitting Diodes

GaAlAs DH high-brightness red LED

GaN-Based Resonant-Cavity Light-Emitting Diodes Grown on Si

GaN-based Green Resonant-Cavity Light-Emitting Diodes with Al Mirror and Copper Plate

Fabrication and Characterization of GaN-Based Resonant-Cavity Light-Emitting Diodes with Dielectric and Metal Mirrors

Investigations on the high performance of InGaN red micro-LEDs with single quantum well for visible light communication applications

Efficient InGaN-based Red Light-Emitting Diodes by Modulating Trench Defects

Ultraviolet-B Resonant-Cavity Light-Emitting Diodes with Tunnel Junctions and Dielectric Mirrors

InGaN blue resonant cavity micro-LED with RGY quantum dot layer for broad gamut, efficient displays

Vertical InGaN Light-Emitting Diode with Hybrid Distributed Bragg Reflectors

InGaN-Based microLED Devices Approaching 1% EQE with Red 609 nm Electroluminescence on Semi-Relaxed Substrates

630-Nm Red InGaN Micro-Light-emitting Diodes (<20 Μm × 20 Μm) Exceeding 1 Mw/mm2 for Full-Color Micro-Displays

Demonstration of 621-Nm-wavelength InGaN-based Single-Quantum-well LEDs with an External Quantum Efficiency of 4.3% at 10.1 A/cm2

InGaN-based Red Light-Emitting Diodes: from Traditional to Micro-Leds

High Output Power GaN-Based Green Resonant-Cavity Light-Emitting Diodes With Trapezoidal Quantum Wells

Red light-emitting diode with full InGaN structure on ScAlMgO 4 substrate

Advancing high-performance visible light communication with long-wavelength InGaN-based micro-LEDs

A Simple Approach to Achieving Ultrasmall III-Nitride Microlight-Emitting Diodes with Red Emission

Green and Red Light-Emitting Diodes Based on Multilayer InGaN/GaN Dots Grown by Growth Interruption Method

Wavelength Tuning in Resonant Cavity Interband Cascade Light Emitting Diodes (RCICLEDs) via Post Growth Cavity Length Adjustment