Abstract:Complex and deep cavity features are ubiquitous in industrial parts, where the harsh interference condition necessitates the use of multi-axis machining strategy to rough-machine the raw blank, in a layer-by-layer manner. However, as the cavity is deep, the cutting tool is typically very long, which requires that the cutting force be carefully controlled. This brings much complexity for determining the machining layers because the cutting force is closely related to the cutting depth, feed direction, and tool orientation, which are all tangled with each other. Conventionally, roughing layers are typically created using iso-parametric curves of boundary surfaces, resulting in longer tool path length and underutilization of the tool' s cutting capacity (i.e., in most of the cutting time, the cutting force is below the given threshold). In addition, the tool orientation is usually adjusted to satisfy the collision-free condition only after the tool path has already been generated, which may introduce ragged tool postures and undermine the finish-surface quality. In this paper, for an arbitrary complex and deep cavity defined by a tetrahedral mesh, borrowing the concept of the iso-scallop height method, we propose a general iso-force rough milling algorithm that enlarges the layer distance as much as possible under the preset force threshold to fully utilize the tool' s bearing capacity and improve cutting efficiency, which is signified by the generated intrinsic machining layers as well as the smooth and collision-free tool paths. The crux of the algorithm is the establishment of a smooth and initially non-orthogonal volumetric frame field whose base vectors respectively represent the potential machining layer normal, the feed direction, and the tool orientation at every point in the volume of the cavity, tending to the hard constraint of collision-free. A scalar field of the magnitude of the cutting force is then constructed inside the volume, which is iteratively synchronized with the volumetric frame field. The iso-force machining layers are then progressively sliced from the optimized cutting force scalar field, on which iso-contour tool paths are finally planned. Both computer simulation and physical cutting experiments are carried out, and the experimental results give a positive confirmation of the generality and effectiveness of the proposed method.

Vector Field Based Volume Peeling for Multi-Axis Machining

Volumetric adaptive slicing of manifold mesh for rapid prototyping based on relative volume error

The Cutter Envelope Surface Calculation of Multi-Axis NC Machining

Iso-force rough machining of freeform deep cavities based on volumetric fields

A Compound Feedrate Control Method For Multi-Axis Cnc Machining

Iso-Planar Feed Vector-Fields-Based Streamline Tool Path Generation for Five-Axis Compound Surface Machining With Torus-End Cutters

Improving Machined Surface Textures in Avoiding Five-Axis Singularities Considering Tool Orientation Angle Changes

Vector field-based curved layer slicing and path planning for multi-axis printing

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

A Parameter Zone Subdivision Method for Rotary Axes Motion Optimization in Five-Axis Toolpath Generation Using Inverse Evaluation Mechanism

Axial characteristic extraction algorithm of film cooling holes based on laser point cloud

Axis path planning of five-axis surface machining by optimizing differential vector of the axis movement considering tool posture limits

Concentricity control for multistage rotor assembly based on contour vectorization

Efficient Voxel-Based Workpiece Update and Cutter-Workpiece Engagement Determination in Multi-Axis Milling

Planning and virtual simulation machining of multi-axis rough machining strategy for micro-integral impeller

Swept volume evaluation using the BSP-dexel representation for the 5-axis CNC machining simulation

Tool axis vector optimization based on automatic smoothing rotary angles of five-axis machining for laser additive manufacturing

A Postprocessing Strategy of a 3-DOF Parallel Tool Head Based on Velocity Control and Coarse Interpolation.

Optimization of Machining Path for Complex Surface Milling in TC11 Based on the K-Means Algorithm

A Multi-Scale Tool Orientation Generation Method for Freeform Surface Machining with Bull-Nose Tool