Abstract:The milling parameters under complex machining conditions have strong time-varying characteristics. Their accurate acquisition is an important foundation for analyzing the cutting mechanics and dynamics. The traditional methods usually perform an off-line calculation on them, resulting in difficulty for real-time monitoring of machining process. Therefore, the paper proposes a quasi-real-time monitoring method for variable milling parameters during multi-axis machining. By replacing the local cut-off allowance of workpiece with a tool entity set at past neighboring cutter location points (PNCLPs), a fast calculation for cutter-workpiece engagement (CWE) entities is achieved through the Boolean operations among the current tool, workpiece blank, and past tool entity set. Then, a 2-dimensional (2D) image processing is used to obtain the CWE window function. For the curved tool path in multi-axis machining, the spatial feed motion of tool is decomposed based on the trochoid motion of tooth side and bottom cutting edges, and an analytical expression of the instantaneous undeformed chip thickness (IUCT) is derived subsequently. During the actual machining process, a self-developed monitoring system is utilized to collect the internal command data of CNC system, further drive the CWE Boolean operation and IUCT calculation model, and obtain the strongly variable milling parameters promptly. Finally, the validity of the proposed method is verified through three-axis and five-axis milling experiments. The maximum average single-step monitoring time is 3.77s. The timely monitoring of milling force can accurately reflect the changing trend of its actual values. The study results indicate that the proposed method can successfully achieve an accurate and real-time monitoring of variable milling parameters during multi-axis milling process.

Efficient Voxel-Based Workpiece Update and Cutter-Workpiece Engagement Determination in Multi-Axis Milling

Improving the Efficiency of Solid-Based NC Simulation by Using Spatial Decomposition Methods

A solid-discrete-based method for extracting the cutter-workpiece engagement in five-axis flank milling

Prediction of Cutter-Workpiece Engagement for Five-Axis Ball-End Milling

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

An Optimisation Algorithm for Reducing the Number of Turns on Space-Filling Curve Toolpath for Sculptured Surface Milling

A new compressed voxel-based method for swept volume modeling of drum cutter and its application

Quasi-real-time monitoring of variable milling parameters during multi-axis machining

Multi-axis Milling Simulation Based on Raycasting Method

Modeling Cutter Engagement Region for Triangular Mesh

Global Uncut Regions Removal for Efficient Contour-Parallel Milling

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

A new toolpath generation method with feed sensitive zones inspection based on inverse evaluation mechanism.

An accurate surface error optimization for five-axis machining of freeform surfaces

Algorithm of Efficiency Improvement and Application in Milling Simulation Based on Solid Modeling

Continuous Toolpath Optimization for Simultaneous Four‐Axis Subtractive Manufacturing

Tool path optimization with stability constraints for ball-end milling cutters based on frequency domain controlling strategy

Collaborative optimization of conical cutter sequence for efficient multi-axis machining of deep curved cavities

Enhanced modeling of instantaneous uncut chip thickness and cutter workpiece engagement region in 5 axis ball end milling: Case of the tilt orientation

Accurate 3-D Parameterised Modelling of Complex Milling Cutter with Fir-Slots for Rotor-Groove Machining

Investigation on the Tool Wear Suppression Mechanism in Non-Resonant Vibration-Assisted Micro Milling