Abstract:Advances in Mechanical Engineering, Volume 16, Issue 4, April 2024. The titanium alloy open integral micro impeller has a strong material strength and high removal rate in the field of multi-axis CNC machining. The flow channel is tiny and the blades are thin and highly twisted. It is difficult to control the surface accuracy and prone to overcutting and undercutting. The NX2212 software post-processing module plans two distinct blade finishing process routes and verifies them using virtual machine tool simulation, taking into account the technical challenges of micro impeller machining. Following verification, the tool path machining code is imported into MATLAB for data fitting. The workpiece surface working condition is determined based on the simulation findings, the blade surface roughness value is calculated, and a physical simulation model of blade finishing is created in the finite element analysis software. The outcomes demonstrate how well the "segmented and sub-regional cutting" processing method may raise blade accuracy. The leading and trailing edges of the blade both had surface roughness increases of 4.86% and 4.19%. The surface morphology of the micro impeller is measured using a white light interferometer, and it is CNC machined using two distinct process methods. The findings demonstrate that there is a significant difference between the value calculated by the finite element analysis software and the surface roughness value measured experimentally which together make up less than 5%. An investigation of the impact of cutting parameters on the surface roughness of micro-structure components is carried out using a three factor, three-level BBD experiment that is founded on the second-order response surface method. The findings indicate that the feed per tooth influences surface roughness more significantly than cutting depth and cutting speed for a reasonable range of cutting parameters; Surface roughness will rise with lower or higher cutting speeds; Raising the feed per tooth and the cutting speed simultaneously may reduce surface roughness; Surface roughness can be accurately predicted and controlled using the second-order response surface method.

Optimization of Machining Path for Complex Surface Milling in TC11 Based on the K-Means Algorithm

A novel tool-path generation method for five-axis flank machining of centrifugal impeller with arbitrary surface blades

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Path Planning for Machining on Surface of a Blade

Tool Orientation Optimization Considering Cutter Deflection Error Caused by Cutting Force for Multi-Axis Sculptured Surface Milling

Cutter Size Optimisation And Interference-Free Tool Path Generation For Five-Axis Flank Milling Of Centrifugal Impellers

Machining of complex-shaped parts with guidance curves

An Effective and Automatic Approach for Parameters Optimization of Complex End Milling Process Based on Virtual Machining

Iso-Planar Feed Vector-Fields-Based Streamline Tool Path Generation for Five-Axis Compound Surface Machining With Torus-End Cutters

Optimizing tool-path generation for three-axis machining of a sculptured impeller blade surface

Modelling and Optimization of Machined Surface Topography in Ball-End Milling Process

Multi-axis CNC finishing and surface roughness prediction of TC11 titanium alloy open integral micro impeller

Tool Path Generation Algorithm Based on Rough Machining of Jade Carving Surface

Tool Path Generation Via The Multi-Criteria Optimisation For Flat-End Milling Of Sculptured Surfaces

Research on tool diameter and processing width optimization for highly efficient machining of complex surfaces constrained by machining interference surface

Global Optimization of Tool Path for Five-Axis Flank Milling with a Cylindrical Cutter

Key Technologies in Ruling Surface Impeller Plunge Milling

Tool path generation for machining shrouded turbine blisk

Tool Path Optimisation for Flank Milling Ruled Surface Based on the Distance Function

Dual-sided co-machining scheme optimization for thin-wall components with complex geometry