Abstract:The High Granularity Timing Detector (HGTD) will be installed in the ATLAS experiment to mitigate pile-up effects during the High Luminosity (HL) phase of the Large Hadron Collider (LHC) at CERN. Low Gain Avalanche Detectors (LGADs) will provide high-precision measurements of the time of arrival of particles at the HGTD, improving the particle-vertex assignment. To cope with the high-radiation environment, LGADs have been optimized by adding carbon in the gain layer, thus reducing the acceptor removal rate after irradiation. Performances of several carbon-enriched LGAD sensors from different vendors, and irradiated with high fluences of 1.5 and 2.5 x 10^15 neq/cm2, have been measured in beam test campaigns during the years 2021 and 2022 at CERN SPS and DESY. This paper presents the results obtained with data recorded by an oscilloscope synchronized with a beam telescope which provides particle position information within a resolution of a few um. Collected charge, time resolution and hit efficiency measurements are presented. In addition, the efficiency uniformity is also studied as a function of the position of the incident particle inside the sensor pad.

What problem does this paper attempt to address?

The paper attempts to address the issue of optimizing the performance of Low Gain Avalanche Detectors (LGAD) in the high-radiation environment of the High-Luminosity Large Hadron Collider (HL-LHC) to meet the requirements of the High Granularity Timing Detector (HGTD) in the ATLAS experiment. Specifically, the study aims to evaluate the performance of LGAD sensors with added carbon elements under different irradiation levels, focusing on key parameters such as collected charge, time resolution, and hit reconstruction efficiency. ### Background and Objectives - **Background**: The ATLAS experiment plans to install a High Granularity Timing Detector (HGTD) during the HL-LHC phase to mitigate the effects of particle pile-up during collisions. LGAD sensors, known for their high-precision time measurement capabilities, have been selected as a key component of the HGTD. - **Objectives**: To optimize LGAD sensors so that they maintain high performance in high-radiation environments. Specific requirements include: - Time resolution of 50 picoseconds (70 picoseconds) per hit. - Collected charge greater than 4 femtocoulombs. - Hit efficiency of 97% at the beginning of life and 95% at the end of life. ### Main Content - **Sensor Optimization**: By adding carbon elements to the gain layer, the acceptor removal rate after irradiation is reduced, thereby enhancing the radiation hardness of the sensors. - **Testing Methods**: Performance tests of carbon-enriched LGAD sensors produced by different manufacturers were conducted using beam test facilities. The tests included measurements of collected charge, time resolution, and hit reconstruction efficiency. - **Results Analysis**: Data analysis was performed to evaluate the performance of the sensors under different irradiation levels and to compare the advantages and disadvantages of sensors produced by different manufacturers. ### Conclusion - **Performance Evaluation**: The results show that at irradiation levels of 1.5 and 2.5 × 10^15 n_eq/cm², LGAD sensors with added carbon elements exhibit good performance in terms of collected charge, time resolution, and hit reconstruction efficiency. - **Optimization Recommendations**: Some sensors maintain high performance even at high irradiation levels, with sensors produced by IHEP performing particularly well at an irradiation level of 2.5 × 10^15 n_eq/cm². ### Significance - **Technological Advancement**: This study provides important references for the design and optimization of sensors in high-radiation environments, contributing to improved detector performance in future high-energy physics experiments. - **Application Prospects**: Optimized LGAD sensors are expected to play a significant role in future high-luminosity collider experiments, enhancing the accuracy and efficiency of data collection.

Performance in beam tests of Carbon-enriched irradiated Low Gain Avalanche Detectors for the ATLAS High Granularity Timing Detector

Beam Test Results of NDL Low Gain Avalanche Detectors (LGAD)

Design and testing of LGAD sensor with shallow carbon implantation

Low Gain Avalanche Detectors with Good Time Resolution Developed by IHEP and IME for ATLAS HGTD project

Performance of a front-end prototype ASIC for the ATLAS High Granularity Timing Detector

Investigation of low gain avalanche detectors exposed to proton fluences beyond 10$^{15}$ n$_\mathrm{eq}$cm$^{-2}$

Investigation of low gain avalanche detectors exposed to proton fluences beyond 10 15 n eq cm -2

Advances in the TCAD modelling of non-irradiated and irradiated Low-Gain Avalanche Diode sensors

Overview of the ATLAS High-Granularity Timing Detector: project status and results

Radiation Hardness of Thin Low Gain Avalanche Detectors

Design and development of Low Gain Avalanche Detectors using Teledyne e2v process

Time-resolved synchrotron light source X-ray detection with Low-Gain Avalanche Diodes

Gain suppression mechanism observed in Low Gain Avalanche Detectors

Destructive breakdown studies of irradiated LGADs at beam tests for the ATLAS HGTD

Performance of a Front End prototype ASIC for picosecond precision time measurements with LGAD sensors

Study of Built-in Amplifier Performance on HV-CMOS Sensor for the ATLAS Phase-Ii Strip Tracker Upgrade

Test to the Performance of a LGAD Based Zero Degree Detector on CSNS Back-n Beamline

Effects of shallow carbon and deep N++ layer on the radiation hardness of IHEP-IME LGAD sensors

Gain suppression study on LGADs at the CENPA tandem accelerator

Characterization of the response of IHEP-IME LGAD with shallow carbon to Gamma Irradiation

Overview of CNM LGAD results: Boron Si-on-Si and epitaxial wafers