Abstract:The paper is devoted to the study of the combustion kinetics and mechanisms of elemental mixtures in the Zr–Mo–Si–B system, as well as the analysis of phase and structural transformations in the combustion wave. A thermodynamic analysis of possible chemical reactions occurring in combustion wave is carried out. In the range of 298–2500 K, the reaction of ZrB 2 formation is preferred. Above 2200 K, the formation of MoB becomes more thermodynamically advantageous compared to MoSi 2 . Estimates of the phase stability of synthesis products have shown that the phases ZrB 2 , MoSi 2 , and MoB are in equilibrium. The experimental dependences T c ( T 0 ) and U c ( T 0 ) are linear, which implies an unchanged combustion mechanism at T 0 = 298–800 K. Preheating leads to an increase in U c . Similarly, the increase in the proportion of Zr and B in the mixture has a similar effect, which increases heat emission and T c . With a minimum content of Zr and B, the interaction of Mo with Si with the formation of MoSi 2 by the mechanism of reaction diffusion is decisive. With an increase in the proportion of Zr and B, the rise of T 0 to 750 K does not affect the T c . The E eff values (50–196 kJ/mol) confirm the significant influence of liquid-phase processes on the combustion kinetics. The mechanism of structure formation has been studied. In the combustion front, a Si–Zr–Mo melt is formed. The primary grains of ZrB 2 and MoB crystallize from this melt as it is saturated with boron. At the same time, the melt spreads over the surface of Zr and Mo particles. This leads to formation of ZrSi x and MoSi x films. Core-shell structures are formed behind the combustion front, which disappear as they move towards the post-combustion zone. The phase composition of the products is formed in the combustion front in less than 0.25 s.

Ultra-fast synthesis and thermodynamic analysis of MoAlB by self-propagating high temperature combustion synthesis

Self-propagating high-temperature synthesis of MoAlB boride ceramics based on MAB-phase

Phase Formation during the Synthesis of the MAB Phase from Mo-Al-B Mixtures in the Thermal Explosion Mode

Making high-performance MoAlB ceramics by hot pressing combustion-synthesized powders

Mechanism of Self-Propagating High-Temperature Synthesis of AlB2–Al2O3 Composite Powders

Rapid Synthesis of MoAlB Ceramic Via Thermal Explosion

Thermal explosive synthesis of MoAlB

Laser‐induced self‐propagating synthesis and electromagnetic wave absorption properties of MoAlB powders

Effect of temperature on the initial reaction behavior of MAB phases (MoAlB powders) at 700–1000 °C in air

Synthesis, microstructure and properties of MoAlB MAB phase films

Combustion and formation behavior of hybrid ZrB 2 and ZrC particles in Al-Zr-B 4C system during self-propagation high temperature synthesis

Thermal stability and decomposition paths of MoAlB ceramic

Self-propagating high-temperature synthesis and reaction mechanism of super-fine particles of gamma-LiAlO2

Thermal stability and decomposition mechanism of Mo2AlB2 in argon atmosphere

Synthesis, Microstructure and Mechanical Properties of a MoAlB Ceramic Prepared by Spark Plasma Sintering from Elemental Powders

Enhancing Oxidation Resistance of MoAlB based on its Anisotropic Oxidation Mechanism: A Theoretical Calculation Guided Experimental Investigation

Self-Propagating High-Temperature Synthesis of the Heterophase Materials in the Zr–Mo–Si–B System: Kinetics and Mechanisms of Combustion and Structure Formation

Effects of Ti/Al Ratio on Formation of Ti-Al Intermetallics/TiB2 Composites by SHS from Ti-Al-B Powder Mixtures

Study on a novel Al-B-Li alloy powder with high enthalpy of combustion

Zrb2/Al2o3 Composite Powders Prepared by Self-Propagating High-Temperature Synthesis

The Mechanical Alloying Mechanism of Various Fe2O3–Al–Fe Systems