Abstract:Many high-precision optical components are made of glass, but they can also be made of a wide variety of other materials. For example, reaction-bonded silicon carbide (RB-SiC) has recently been used to make optical parts for poor working conditions due to its distinct properties such as low density, high hardness, and low thermal expansion coefficient. Thus, in order to rapidly manufacture high-precision aspherical mirrors made from RB-SiC, a novel aspheric manufacturing system equipped with magnetorheological finishing (MRF) technology is described in this paper, which incorporates a host of features and has unprecedented processing versatility. The system has four degrees of freedom, and can realize manufacture or measurement based on the Cartesian coordinate or polar coordinate systems. To achieve good surface accuracy, the polishing wheel combines self-rotation movement with corotation. The prepolishing and fine polishing processes can be done on the same machine by changing different process parameters accordingly, and the on-machine profilometer measures the aspheric forms generated during prepolishing. Experiments were carried out on the features of magnetorheological (MR) fluids by polishing a parabolic SiC mirror with a Phi 100 mm aperture. The results indicated that the required convergence speed, surface roughness, and figure accuracy can be achieved with high efficiency. The final surface roughness with an initial value of Ra = 34.39 nm reached 26.74 nm after 20 hours of prepolishing using MR fluids carrying oil (Al2O3 as the nonmagnetic particle), and then reached 1.14 nm after 50 hours of fine polishing using the MR fluid with diamond power as the nonmagnetic particle. The figure accuracy also improved to lambda 130 rms (lambda = 632.8 nm) at an arbitrary Phi 30 mm subaperture.

Spherical silicon micromirrors bent by anodic bonding

Research of an Adaptive Micro-Mirror Based on Micro-Opto-Electro-Mechanical- System

Study of A Deformable Micro-Mirror Based on Pzt Films

The Bonding Process for a Novel Micro-Deformable Mirror

Study and Manufacture of a Novel Micro-Deformable Mirror

Novel deformable mirror based on silicon micromachining technology

Fabrication Of Compact Turning Mirrors In Silicon-On-Insulator Materials

Arrays of monocrystalline silicon micromirrors fabricated using CMOS compatible transfer bonding

Simultaneous molding and low-temperature bonding of Au microstructures for fabrication of micromirrors on non-silicon substrates

Study of a Novel Deformable Mirror for Adaptive Optics Used in Satellite

Magnetorheological Finishing of SiC Aspheric Mirrors

A Experimental Research on Silicon Micromirror Arrays Made by Chemical Etching

A new fabrication method for enhancing the yield of linear micromirror arrays assisted by temporary anchors

Experimental Study on Roughness and Flatness of Micromirror Fabricated by Different Anisotropic Silicon Etching Processes

Fabrication of micro-mirrors with pyramidal shape using anisotropic etching of silicon

A Monolithic Gimbal Micro-Mirror Fabricated and Remotely Tuned with a Femtosecond Laser

3D Surface Topography and Reflectivity of Anisotropic Etched Silicon Micromirrors for BioMEMS

Fabrication of Large-Area Silicon Spherical Microlens Arrays by Thermal Reflow and ICP Etching

Cost-efficient and Flexible Fabrication of Rectangular-Shaped Microlens Arrays with Controllable Aspect Ratio and Spherical Morphology

Fabrication of Concave Spherical Microlenses on Silicon by Femtosecond Laser Irradiation and Mixed Acid Etching.

Scalable Shape-Controlled Fabrication of Curved Microstructures Using a Femtosecond Laser Wet-Etching Process