Abstract:Cryogenic deep reactive ion etching (Cryo DRIE) of silicon has become an enticing but challenging process utilized in front-end fabrication for the semiconductor industry. This method, compared to the Bosch process, yields vertical etch profiles with smoother sidewalls not subjected to scalloping, which are desired for many microelectromechanical systems (MEMS) applications. Smoother sidewalls enhance electrical contact by ensuring more conformal and uniform sidewall coverage, thereby increasing the effective contact area without altering contact dimensions. The versatility of the Cryo DRIE process allows for customization of the etch profiles by adjusting key process parameters such as table temperature, O2 percentage of the total gas flow rate (O2 + SF6), RF bias power, and process pressure. In this work, we undertake a comprehensive study of the effects of Cryo DRIE process parameters on the trench profiles in the structures used to define cantilevers in MEMS devices. Experiments were performed with an Oxford PlasmaPro 100 Estrelas ICP-RIE system using positive photoresist SPR-955 as a mask material. Our findings demonstrate significant influences on the sidewall angle, etch rate, and trench shape due to these parameter modifications. Varying the table temperature between -80°C and -120°C under a constant process pressure of 10 mTorr changes the etch rate from 3 to 4 μm/min, while sidewall angle changes by ~2°, from positive ( 90° relative to the Si surface) tapering. Altering the O2 flow rate with constant SF6 flow results in a notable 10° shift in sidewall tapering. Furthermore, SPR-955 photoresist masks provide selectivity of 46:1 with respect to Si and facilitates the fabrication of MEMS devices with precise dimension control ranging from 1 to 100 μm for etching depths up to 42 μm using Cryo DRIE. Understanding the influence of each parameter is crucial for optimizing MEMS device fabrication.

3D Surface Topography and Reflectivity of Anisotropic Etched Silicon Micromirrors for BioMEMS

Experimental Study on Roughness and Flatness of Micromirror Fabricated by Different Anisotropic Silicon Etching Processes

Machining and functional testing of adaptive micro-mirror array

Fabrication of micro-mirrors with pyramidal shape using anisotropic etching of silicon

Physical Parameter Extraction and Modeling of Metallized Deeply-Etched Vertical Mirrors

A Experimental Research on Silicon Micromirror Arrays Made by Chemical Etching

A polymer trench filling based silicon isolation technique and its application to two-axis scanning comb-drive micromirrors

Arrays of monocrystalline silicon micromirrors fabricated using CMOS compatible transfer bonding

Anisotropic Wet Etching for Micro-Fabrication

A new theory for the anisotropic etching of silicon and some underdeveloped chemical micromachining concepts

Spherical silicon micromirrors bent by anodic bonding

Optical-Electromechanical Performance of Mems Tilting Micro-Mirrors for Aon Communication System

State-of-the-Art Materials Used in MEMS Micromirror Arrays for Photonic Applications

Optimization of Etching Processes for the Fabrication of Smooth Silicon Carbide Membranes for Applications in Quantum Technology

Cryogenic DRIE Processes for High-Precision Silicon Etching in MEMS Applications

Fabrication of Vertical Sidewalls by Anisotropic Etching of Silicon (100) Wafers

Fabricating A Variety Of Micro-Optics Structures Using Anisotropic Etching Of Silicon

UV-Nanoimprint and Deep Reactive Ion Etching of High Efficiency Silicon Metalenses: High Throughput at Low Cost with Excellent Resolution and Repeatability

A Novel and Reliable Approach for Controlling Silicon Membrane Thickness with Smooth Surface

Pyramidal micro-mirrors for microsystems and atom chips

Recent Frontiers in Anisotropic Wet Chemical Etching Techniques for Precision Surface Modification of Industrial-Grade Bulk Crystalline Silicon Wafers: Enhancing Performance in Photovoltaics and MEMS Devices