Abstract:An in-situ measurement system for porous alumina (PA) film based on atomic force microscope (AFM) in liquid and reflectometric interference spectroscopy (RIFS) was developed. The present article briefly discusses the principle and structure of the system, and introduces its unique characteristic. The system consists of probe unit, XY scanner, Z-piezo feedback system, computer and software, fiber optic spectrometer, anodization control circuitry etc. When a white light beam illuminates the surface of the film, the reflective light beams at the front and back side of the layer are coherent, and lead to periodical amplifications and extinction in the reflective spectrum with the information of the optical thickness of the film. A fiber optic spectrometer was applied in the system which input the refractive spectrum into the computer by which the optical thickness of the film was calculated. Meanwhile according to the surface topography of PA films by AFM in liquid, the effective refractive index was calculated based on Maxwell-Garnett theory and coherent potential approximation (CPA). So the thickness of PA films could be gained at last. To checkout the feasibility and stability of the system, the real-time scanning and thickness measurement experiments were done during anodization of Al sheets in oxalic acid aqueous solution. In the experiment, the authors used 25 mm diameter aluminum (Al) sheets with 99.999% purity and 0.4 mm thickness as the anode, and graphite rod as the cathode. The pretreatment-cleaned Al sheets were anodized in an aqueous solution of 0.5 mol x L(-1) oxalic acid at the constant temperature (20 +/- 0.2) degrees C with 20 mA x cm(-2) anodization electronic current density. Real-time AFM images of PA film were successfully obtained during anodization. The pore-ratios of Al sheet were 7.81% and 13.83% at oxidizing time 150 min and 180 min respectively. Correspondingly, the effective indexes were calculated to be 1.62 and 1.60, respectively. Combining the reflective spectrum gained by the fiber optic spectrometer, the wave number differences between the two adjacent extrema were 57.69 mm(-1) and 50.00 mm(-1). Based on reflectometric interference spectroscopy, the thickness of PA films was found to be 5.35 and 6.25 microm with oxidizing time 150 min and 180 min respectively. The system has characteristics of convenient manipulation, non-destructive and high-resolution in-situ measurement. And the surface morphology, pore-ratio and effective refractive index can also be gained at the same time.

Electron micrography and x-ray study of dip-lacquered LiF (220)

Comparison of UV optical and structural properties of Al2O3 and LaF3

Surface Profile Measurement of Micro-Optics by Using a Long Stroke Atomic Force Microscope

In-situ quantification of the surface roughness for facile fabrications of atomically smooth thin films

Experimental Study of a Chemical Reaction Between LiF and Al

Study of In-Situ Measurement System for Porous Alumina Film Based on AFM and Reflectometric Interference Spectroscopy

Observation of the Surface Layer of Lithium Metal using In Situ Spectroscopy

LEED AND ARUPS STUDIES ON Fe/Ru(1010)SURFACE

High‐resolution x‐ray emission spectrometry in the lithium K range with a reflection zone plate spectrometer

Study of Roughness Evolution and Layer Stacking Faults in Short-Period Atomic Layer Deposited Hfo2/Al2o3 Multilayers

LiOx-modification of Ni and Co3O4 surfaces: An XPS, LEIS and LEED study

X-ray Scattering from a Rough Surface and Damaged Layer of Polished Wafers

Ion sputtering nanostructuring crystalline MgF2 surface and its energy-dependent surface roughness

Extracting information from X-ray diffraction patterns containing Laue oscillations

Thin films with high surface roughness: thickness and dielectric function analysis using spectroscopic ellipsometry

An etched multilayer as a dispersive element in a curved-crystal spectrometer: implementation and performance

Advanced spectroscopic investigation of colour centres in LiF crystals irradiated with monochromatic hard X-rays

Comparative scanning probe microscopy study of the surface morphology of Au films grown from the vapor onto glass, fused silica, and muscovite mica

Quantitative Agreement Between Dynamical Rocking Curves in Ultrafast Electron Diffraction for X-Ray Lasers.

Interfacial Reactions At Al/Lif And Lif/Al

XPS and AFM study of chemical mechanical polishing of silicon nitride