Abstract:Incorporating a polymer dielectric blend with amine‐functionalized units facilitates low voltage operation of bispentafluorophenoxy silicon phthalocyanine in organic thin film transistors (OTFTs) while maintaining high charge mobility. Low‐cost and high‐performance electronics based on synthetically simple materials are required to fuel the deployment of smart packaging and wearable electronics. Metal phthalocyanines (MPcs) are promising semiconductors for use in n‐type organic thin film transistors (OTFTs) but often require high operating voltages. The first silicon phthalocyanine‐based OTFT with a polymer dielectric is reported as an alternative to traditional metal oxide dielectrics. Incorporating poly(methyl methacrylate) (PMMA) as the dielectric successfully reduces the threshold voltage (VT) of bispentafluorophenoxy SiPc (F10‐SiPc) from 14.9V to 7.3V while retaining high mobility. Further reduction in VT is obtained by using copolymers and blends of PMMA and dimethylamino ethyl methacrylate (DMAEMA)‐containing polymers, where a higher molar fraction of DMAEMA leads to a consistent drop in VT to ‐0.7 V. The electron‐donating groups of the tertiary amines in the DMAEMA show clear interfacial doping of the semiconductor, reducing the voltage required to populate the dielectric/semiconductor interface with charge carriers and turn on the device. Blending trace amounts of DMAEMA‐containing copolymers with PMMA proves to be an effective strategy for reducing the VT while keeping the charge mobility high, unlike when using pure copolymers with elevated DMAEMA content. Time of flight secondary ion mass spectroscopy (ToF‐SIMS) and X‐ray photoelectron spectroscopy (XPS) demonstrate that the DMAEMA‐containing copolymer is floating to the surface of the PMMA blend at the dielectric–semiconductor interface, which explains the reduced VT. Synchrotron scanning transmission X‐ray microscopy (STXM) demonstrates that PMMA promotes a more edge‐on orientation of F10‐SiPc films, compared to the more face‐on orientation when deposited on the DMAEMA containing copolymer. This study demonstrates a straightforward process for designing dielectric polymers and their blends for the reduction in VT for n‐type OTFTs.

Methyl Functionalization on Polyimide Side Chains as Gate Dielectrics for Organic Transistors

Optimization of Alkyl Side Chain Length in Polyimide for Gate Dielectrics to Achieve High Mobility and Outstanding Operational Stability in Organic Transistors

Double Alkyl Side Chains Functionalized Polyimide As Gate Dielectrics for Application in Organic Transistors

Functionalization of Low‐k Polyimide Gate Dielectrics with Self‐Assembly Monolayer Toward High‐Performance Organic Field‐Effect Transistors and Circuits

Recent Progress in Aromatic Polyimide Dielectrics for Organic Electronic Devices and Circuits

Influence Of The Dielectric And Of The Active Layer Doping On The Fet Mobility In Ppv-Based Devices

Functionalization of Polymer Dielectrics: Functionalization of Low‐k Polyimide Gate Dielectrics with Self‐Assembly Monolayer Toward High‐Performance Organic Field‐Effect Transistors and Circuits (Adv. Mater. Interfaces 11/2021)

Correlation between dielectric/organic interface properties and key electrical parameters in PPV-based OFETs.

Polysiloxane-Poly(Vinyl Alcohol) Composite Dielectrics For High-Efficiency Low Voltage Organic Thin Film Transistors

Facile Synthesis of Solution-Processed Silica and Polyvinyl Phenol Hybrid Dielectric for Flexible Organic Transistors

Enhancing the Electrical and Thermal Stability of Organic Thin-Film Transistors by Utilizing Fluorinated Polyimide and Silicon Dioxide Bilayer Gate Dielectric

Enabling Gate Dielectric Design for All Solution-Processed, High-Performance, Flexible Organic Thin-Film Transistors.

Chemically Tunable Organic Dielectric Layer on an Oxide TFT: Poly(p-xylylene) Derivatives

Diketopyrrolopyrrole-based small molecules for solution-processed n-channel organic thin film transistors

Molecular and Atomic Layer Deposition of Hybrid Polyimide–Al2O3 Gate Dielectrics for Flexible Electronic Devices

Polymer Electrolyte Blend Gate Dielectrics for High-Performance Ultrathin Organic Transistors: Toward Favorable Polymer Blend Miscibility and Reliability

Organic Thin-Film Transistors with Poly(Methyl Silsesquioxane) Modified Dielectric Interfaces

Electron Donating Functional Polymer Dielectrics to Reduce the Threshold Voltage of n‐Type Organic Thin‐Film Transistors

Modulating Charge Transport from Thermally Activated to "Band‐Like" Through Interfacial Bottom‐Up Binding Capability of Bilayer Polymer Dielectrics

A Facile Photo-cross-linking Method for Polymer Gate Dielectrics and Their Applications in Fully Solution Processed Low Voltage Organic Field-effect Transistors on Plastic Substrate

Cinnamate-Functionalized Natural Carbohydrates As Photopatternable Gate Dielectrics for Organic Transistors