Abstract:Due to their exceptional mechanical characteristics and corrosion resistance, CoCrNi medium-entropy alloys have been the subject of increasing interest in recent years. In this study, CoCrNi medium entropy alloys strengthened with iron-based amorphous materials were fabricated using Selective Laser Melting (SLM) technology, with established gradients at 0, 3, 5, and 7¬†wt%. At room temperature, the yield strength and hardness of the CoCrNi-5MG specimen showed marked improvements of 27.5¬†% and 34.7¬†% respectively, compared to its pure CoCrNi counterpart, while still preserving a considerable fracture elongation of 24¬†%. Under low-temperature conditions, all samples prepared via Selective Laser Melting (SLM) demonstrated significant improvements in yield strength and fracture plasticity. Furthermore, the CoCrNi samples doped with iron-based amorphous material exhibited superior low-temperature performance, with the increase in plasticity exceeding that of the Pure CoCrNi samples compared to room temperature conditions. Importantly, an increase in the content of iron-based amorphous material resulted in a decrease in the corrosion current density, thereby noticeably enhancing corrosion resistance. Our study proposes an innovative approach to enhancing the strength and corrosion resistance of CoCrNi medium-entropy alloys. This is achieved by incorporating iron-based amorphous materials during the SLM preparation process, thereby providing a new avenue for optimizing its properties.

Corrosion behavior and mechanism of FeCrNi medium entropy alloy prepared by powder metallurgy

A novel supersaturated medium entropy alloy with superior tensile properties and corrosion resistance

Fe61.5Cr17.5Ni13Al8 High-Entropy Alloy: A Study of Corrosion Behavior

Comparing the Corrosion Behavior of CoCrNi Medium-Entropy Alloy and Duplex Stainless Steel in Ammonium Chloride Solution

A comparison of the mechanical and corrosion behavior of Fe49.5Mn25Cr15Ni10C0.5 medium-entropy alloy with its subsystems steels

A comparative study on the corrosion behavior of CoCrNi medium-entropy alloy and 316L stainless steel in simulated marine environment

Microstructure and corrosion behavior of Co-free FeCrNiSi0.4 medium entropy alloy coating fabricated by laser cladding

Superior anticorrosion performance of crystal-amorphous FeMnCoCrNi high-entropy alloy

Effect of Si on Microstructure and Mechanical Properties of FeCrNi Medium Entropy Alloys

A Novel High-Entropy Alloy AlMgZnSnPbCuMnNi with Low Free Corrosion Potential

Corrosion performance of selective laser-melted equimolar CrCoNi medium-entropy alloy vs its cast counterpart in 3.5 wt% NaCl

Corrosion behaviors and passive film properties of a newly developed cost-effective AlCrFeNi eutectic high entropy alloy in different corrosive solutions

Susceptibility of chloride ion concentration, temperature, and surface roughness on pitting corrosion of CoCrFeNi medium‐entropy alloy

Corrosion Behavior of FeCrMnxAlCu High-Entropy Alloys in NaOH Solutions

Interstitial nitrogen enhances corrosion resistance of an equiatomic CoCrNi medium-entropy alloy in sulfuric acid solution

Comparative Study of Mechanical and Corrosion Behaviors of Cost-Effective AlCrFeNi High Entropy Alloys

A non-equiatomic FeNiCoCr high-entropy alloy with excellent anti-corrosion performance and strength-ductility synergy

Corrosion Behavior of CoCrNi Medium-Entropy Alloy in NH4Cl Solution with Different pH

Fabrication of iron-based amorphous reinforced CoCrNi medium-entropy alloys by selective laser melting: Enhancement of mechanical properties and improvement of corrosion resistance

Corrosion behaviors of amorphous and nanocrystalline Fe-based alloys in NaCl solution

Corrosion resistant nanostructured eutectic high entropy alloy