Abstract:The metastable dual phase FeMnCoCr high entropy alloy (HEA) has attracted great attention since it was first proposed, as it can overcome the strength-ductility trade-off at room temperature. For materials in engineering applications, it is also important to achieve high corrosion resistance while maintaining good mechanical properties. In this study, we simultaneously improved the mechanical properties and corrosion resistance of a FeMnCoCr-based HEA via Cu alloying and by applying a simple processing route that combined cold rolling and partial recrystallization annealing. The alloy doped with 0.3 at.% Cu and processed by annealing at 650 °C for 3 min exhibited the best combination of strength and ductility, i.e., yield strength of 768 MPa, tensile strength of 960 MPa and uniform elongation of 33.6%. The high yield strength majorly originated from high density dislocations and grain boundaries in the material, while the formation of deformation twins, martensite laths, stacking faults and Lomer Cottrell locks contributed to the continuous strain hardening and good ductility. The addition of Cu also enhanced corrosion resistance of the HEA in a NaCl solution by improving stability of the alloy matrix and elevating compactness of the passive film. The solid solution of Cu elevated equilibrium potential of the matrix and promotes transformation of microstructure from the face-centered cubic (fcc) plus hexagonal close-packed (hcp) dual phases to the fcc single phase, effectively inhibiting the accelerated corrosion of micro galvanic couple between different phases and enhancing stability of the matrix. At the same time, the enrichment of CuO in the inner layer of the passive film reduced the defect density within the Fe-rich oxide layer, improving the protection of the passive film against the matrix.

A novel supersaturated medium entropy alloy with superior tensile properties and corrosion resistance

Corrosion behavior and mechanism of FeCrNi medium entropy alloy prepared by powder metallurgy

A novel cobalt-free oxide dispersion strengthened medium-entropy alloy with outstanding mechanical properties and irradiation resistance

A non-equiatomic FeNiCoCr high-entropy alloy with excellent anti-corrosion performance and strength-ductility synergy

A novel cobalt-free FeMnCrNi medium-entropy alloy with exceptional yield strength and ductility at cryogenic temperature

Additive manufactured oxide-dispersion strengthened FeCrNi medium entropy alloy with superior mechanical properties

Ultrastrong and Ductile Metastable Fe-rich Medium-Entropy Alloy with High-Density Nanolamellar L12 Precipitates

Co-free non-equilibrium medium-entropy alloy with outstanding tensile properties

Mechanical properties and microstructural evolution of a novel (FeCoNi)86.93Al6.17Ti6.9 medium entropy alloy fabricated via powder metallurgy technique

A nano-sized precipitate strengthened medium entropy alloy with superior strength-ductility synergy and exceptional corrosion resistance

Fabrication of iron-based amorphous reinforced CoCrNi medium-entropy alloys by selective laser melting: Enhancement of mechanical properties and improvement of corrosion resistance

A comparison of the mechanical and corrosion behavior of Fe49.5Mn25Cr15Ni10C0.5 medium-entropy alloy with its subsystems steels

Ultrahigh cryogenic strength and ductility in a duplex metastable ferrous medium-entropy alloy

Microstructure and Properties of a Co-Free Fe50mn27ni10cr13 High Entropy Alloy

Cu alloying enables superior strength-ductility combination and high corrosion resistance of FeMnCoCr high entropy alloy

Microstructure and tensile properties of dissimilar metal joints between FeCoCrNiMn alloy and stainless steel using CoCrNiMn powders as filler material

Effect of Si on Microstructure and Mechanical Properties of FeCrNi Medium Entropy Alloys

Fe61.5Cr17.5Ni13Al8 High-Entropy Alloy: A Study of Corrosion Behavior

Significant strength enhancement of FeCrNiMox medium-entropy alloys via hard intermetallic particles dispersion strengthening

Lamellar-structured low-cost FeMn0.7Ni0.6Cr0.4Al0.3 high entropy alloy with excellent tensile properties

Design of ultrastrong but ductile medium-entropy alloy with controlled precipitations and heterogeneous grain structures