Abstract:The pursuit of strong and ductile synergy is a key objective in the development of metals and alloys. Medium entropy alloys (MEAs) have emerged as a highly promising structural material, with potential applications in high-speed trains, aerospace, and defense fields. This study systematically investigates the effect of annealing temperature on the mechanical properties of a CrCoNi based MEA, namely (CrCoNi) 97 Al 1 Ti 2 MEA. The (CrCoNi) 97 Al 1 Ti 2 MEA was fabricated by cold rolling reduction of 40% and subsequently annealed at 820 °C for 1 h to achieve a heterogeneous structure that exhibits an excellent combination of strength and plasticity. Scanning electron microscopy and transmission electron microscopy were used to characterize the samples before and after tensile deformation, and to reveal the underlying deformation mechanisms. The results show that annealing at 820 °C for 1 h introduces a large number of precipitation phases, which are not observed at other annealing temperatures. During plastic deformation, the fine recrystallized grains contribute to the good ductility of the (CrCoNi) 97 Al 1 Ti 2 MEA, while deformation twinning and dislocation densities enable it to maintain good strength. The precipitation phase formed by annealing at 820 °C also significantly improves the strength of the (CrCoNi) 97 Al 1 Ti 2 MEA. Overall, this study provides insights into the mechanical properties of (CrCoNi) 97 Al 1 Ti 2 MEA, and highlights the importance of annealing temperature in achieving an optimal combination of strength and plasticity. The findings of this study have important implications for the design and development of MEAs for various applications in structural engineering.

Effect of Si on Microstructure and Mechanical Properties of FeCrNi Medium Entropy Alloys

Significant strength enhancement of FeCrNiMox medium-entropy alloys via hard intermetallic particles dispersion strengthening

Influence of Si Addition on the Microstructures, Phase Assemblages and Properties in CoCrNi Medium-Entropy Alloy

Effects of metalloid Si on the microstructure and mechanical properties of Fe36Ni36Cr10Mo1Al17-XSiX alloys

Microstructural Evolution and Mechanical Properties of Al0.3CoCrFeNiSix. High-Entropy Alloys Containing Coherent Nanometer-Scaled Precipitates

Dual enhancement in strength and ductility of Fe-rich medium-entropy alloys via an in situ formed heterogeneous multi-phase structure

Unveiling the Precipitation Behavior and Mechanical Properties in G-phase Strengthened CrFe2Ni2Ti0.2Six Multi-Principal Element Alloys

Effect of Si and C additions on the reaction mechanism and mechanical properties of FeCrNiCu high entropy alloy

Effect of Si on Fe-rich intermetallic formation and mechanical properties of heattreated Al-Cu-Mn-Fe alloys

Strengthening Fe50+xMn25Cr15Ni10-x medium-entropy alloys by Ni/Fe replacement: Experiments and molecular dynamics study

Extra Strengthening and Work Hardening in Novel Precipitation‐Hardened FeCrNiSi x Medium‐Entropy Alloys

Additive manufactured oxide-dispersion strengthened FeCrNi medium entropy alloy with superior mechanical properties

Effect of the amount of SiC particles on the microstructure, mechanical and wear properties of FeMnCoCr high entropy alloy composites

Improving wear and corrosion resistance of LDEDed CrFeNi MEA through addition of B and Si

The effect of Co substitutions for Ni on microstructure, mechanical properties and corrosion resistance of Fe50Mn25Cr15Ni10 medium-entropy alloy

Effect of oxide nanoparticles on the mechanical properties of novel cobalt-free FeCrNi medium entropy alloys

Mechanical properties and microstructural evolution of a novel (FeCoNi)86.93Al6.17Ti6.9 medium entropy alloy fabricated via powder metallurgy technique

Effects of Si addition on mechanical, electrical and magnetic property of Cu-10Fe alloy

Effect of Al Addition on Microstructure and Properties of CoCrNi Medium-Entropy Alloy Prepared by Powder Metallurgy

Corrosion behavior and mechanism of FeCrNi medium entropy alloy prepared by powder metallurgy

Influence of annealing temperatures on the microstructure and deformation behavior of a CrCoNi based medium-entropy alloy