Abstract:The emergence of medium-entropy alloys (MEAs) provides new insights for the design of the next generation structural alloys. In the present work, Fe60Cr15Ni15Co10-xAlx (x = 0, 3, 5 and 7 at.%) and Fe60Cr15Ni16Al9 MEAs were designed and prepared by vacuum arc melting. The microstructure was characterized by X-ray diffractometer, electron backscatter diffraction and transmission electron microscope. The results show that the volume fraction of body-centered-cubic (BCC) phase increase with the increase of Al content. The dual-phase Fe60Cr15Ni16Al9 MEA with heterogeneous grain size (from ∼200 nm to ∼3 μm) is consisting of Fe–Cr–Ni-rich face-centered-cubic (FCC) and Ni–Al-rich BCC phases. The uniaxial tensile tests were conducted at 298 K and 77 K. The results show that the strength of the MEAs increases with the increase of Al content, and replacing Co with Al significantly promotes deformation-induced martensitic transformation from the FCC to BCC in these MEAs. Such unique dual-phase structure results in excellent mechanical properties of the Fe60Cr15Ni16Al9 MEA (yield strength, ultimate tensile strengths and ductility at 298 K and 77 K are 900 and 1300 MPa, 1100 and 1680 MPa, 26% and 35%, respectively), which are mainly attributed to deformation-induced martensitic transformation and hetero-deformation-induced hardening. The alloy-design principles in this study pave the way to design low-cost MEAs with outstanding mechanical properties at room and cryogenic temperatures.

Significant strength enhancement of FeCrNiMox medium-entropy alloys via hard intermetallic particles dispersion strengthening

Effect of Si on Microstructure and Mechanical Properties of FeCrNi Medium Entropy Alloys

Additive manufactured oxide-dispersion strengthened FeCrNi medium entropy alloy with superior mechanical properties

A novel cobalt-free oxide dispersion strengthened medium-entropy alloy with outstanding mechanical properties and irradiation resistance

Dual enhancement in strength and ductility of Fe-rich medium-entropy alloys via an in situ formed heterogeneous multi-phase structure

Partially Recrystallized Heterostructure Via Mo-doping Endows CoCrNi Medium-Entropy Alloy with Exceptional Strength and Ductility

Composition Design Study of Strong and Ductile Mo-alloyed CoCrNi Medium-Entropy Alloys

Heterogeneous-structure-induced ultrahigh strength and ductility in a metastable dual-phase Fe60Cr15Ni16Al9 medium entropy alloy

Strengthening Fe50+xMn25Cr15Ni10-x medium-entropy alloys by Ni/Fe replacement: Experiments and molecular dynamics study

Enhanced strength-ductility synergy in a Ta-doped CoCrNi medium-entropy alloy with a dual heterogeneous structure

Overcoming the Strength-Ductility Trade-off Via the Formation of Nanoscale Cr-rich Precipitates in an Ultrafine-Grained FCC CrFeNi Medium Entropy Alloy Matrix

Strengthening of ferrous medium entropy alloys by promoting phase transformation

Mechanical properties and microstructural evolution of a novel (FeCoNi)86.93Al6.17Ti6.9 medium entropy alloy fabricated via powder metallurgy technique

In-situ TiC x N y nanoparticle reinforced crack-free CoCrFeNi medium-entropy alloy matrix nanocomposites with high strength and ductility via laser powder bed fusion

Effect of Fe Content on Microstructure and Mechanical Properties of Fex(Cocrni)100-X Medium-Entropy Alloys

Effect of oxide nanoparticles on the mechanical properties of novel cobalt-free FeCrNi medium entropy alloys

Ultrastrong and Ductile Metastable Fe-rich Medium-Entropy Alloy with High-Density Nanolamellar L12 Precipitates

Advanced mechanical properties obtained via transition metals doped in CrFeNi medium entropy alloy

Effects of Ti and Al Additions on Microstructure and Mechanical Properties of FeCrNi Medium Entropy Alloy Fabricated by Laser Powder Bed Fusion

Exceptional strength-ductility synergy of additively manufactured CoCrNi medium-entropy alloy achieved by lattice defects in heterogeneous microstructures

Achieving an excellent combination of strength and ductility in a single-phase metastable medium-entropy alloy