Abstract:High-density dislocations and nano-twinning are known to significantly influence the work hardening ability of materials, presenting a potent approach for enhancing their overall strength. Here, a superior tensile strength-ductility synergy in a FeCoCrNiMo0.2 high entropy alloy (HEA) with high density dislocation and nano-twinning was achieved by employing cryo-rolling followed by subsequent annealing. Through electron microscope observation, the effects of geometrically necessary dislocation density and nano-twinning on tensile strength and plasticity are elucidated. The microstructure analysis reveals a substantial presence of dislocations and nano-twinning within the deformed grains following short-time annealing at 600 °C and 800 °C. The strategic presence of nano-twins serves as effective impediments to dislocation slip, resulting in the storage of dislocations within the grains, which contributes to the alloy's superior strength-ductility synergy and remarkable work hardening ability. Impressively, the obtained tensile strength-ductility matching exhibits yield strength and ductility values of 992.1 MPa/0.19 and 719 MPa/0.39, respectively. Upon increasing the annealing temperature to 1000 °C, high-density annealing twins emerge in the recrystallized grains, accompanied by a concomitant reduction in the geometrically necessary dislocation density due to dislocation rearrangement and annihilation. Furthermore, a small amount of topological close-packed (TCP) phase and L12 phase precipitation during annealing are observed, contributing to increased work hardening ability of the alloy. The findings underscore the importance of microstructural engineering as a valuable strategy for optimizing the mechanical properties of HEAs with a face-centered cubic structure.

Heterostructuring an equiatomic CoNiFe medium-entropy alloy for enhanced yield strength and ductility synergy

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Heterogeneous Microstructure and Tensile Properties of Fe50Mn30Co10Cr10 Metastable High-Entropy Alloy

Hetero-deformation-induced (HDI) plasticity induces simultaneous increase in both yield strength and ductility in a Fe 50 Mn 30 Co 10 Cr 10 high-entropy alloy

Developing harmonic structure in CoCrFeMnNi high entropy alloy to enhance mechanical properties via powder metallurgy approach

Additively manufactured heterogeneous precipitation-strengthened high-entropy alloys with high strength and ductility

Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy

Heterogeneous Structure Design to Strengthen Carbon-Containing CoCrFeNi High Entropy Alloy

Achieving excellent strength-ductility synergy via high density dislocation and nano-twinning in cryo-rolled FeCoCrNiMo0.2 high-entropy alloy

Recrystallized hard zone and resultant tri-modal microstructure produces superior mechanical properties in a single-phase heterostructured high-entropy alloy

Additively manufactured low-gradient interfacial heterostructured medium-entropy alloy multilayers with superior strength and ductility synergy

Nanoprecipitate and stacking fault-induced high strength and ductility in a multiscale heterostructured high-entropy alloy

Tensile properties and strengthening mechanisms of eutectic high-entropy alloys induced by heterostructure

Enhanced Strength-Ductility Synergy in High-Entropy Alloys Via Architecting Three-Level Gradient Hierarchical Nanostructure

Dual enhancement in strength and ductility of Fe-rich medium-entropy alloys via an in situ formed heterogeneous multi-phase structure

Strain partitioning enables excellent tensile ductility in precipitated heterogeneous high-entropy alloys with gigapascal yield strength

Dual-interstitials promoted multiple mechanisms enhance strength-ductility synergy of an equiatomic high-entropy alloy

Heterogeneous-structure-induced ultrahigh strength and ductility in a metastable dual-phase Fe60Cr15Ni16Al9 medium entropy alloy

High strength and ductility in a dual-phase hetero-structured AlCoCrFeNi2.1 eutectic high-entropy alloy by powder metallurgy

Tensile deformation behavior and deformation twinning of an equimolar CoCrFeMnNi high-entropy alloy

Mechanical behavior and microstructure-property correlation of a metastable interstitial high entropy alloy with hierarchical gradient structures