Abstract:A microfluidic sub-microliter sample introducing system was developed for direct analysis of Chinese rice wine by inductively coupled plasma mass spectrometry (ICP-MS). It consisted of a microfluidic chip integrating variable-volume sampling channels (0.1–0.8μL), an eight-way multi-functional valve used in flow injection analysis (FIA), a syringe pump and a peristaltic pump of the Ar ICP-MS instrument. Three solutions, i.e., 15, 40 and 100gL−1 glucose in 20% ethanol were used to simulate Chinese rice wine of the dry type, the semidry type and the semisweet type, each. The effects of their volume introduced into ICP-MS on the plasma stability and ICP-MS intensities were studied. The experimental results showed that neither alteration of plasma stability nor carbon deposition was observed when the sampling volume of 20% ethanol containing 100gL−1 glucose was downscaled to 0.8μL. Further reducing the sampling volume to 0.4μL, no significant difference between the intensities of multi-element standard prepared in three simulated Chinese rice wine matrices and those in aqueous solution was observed. It indicated no negative effect of Chinese rice wine matrix on the ICP-MS intensities. A sampling volume of 0.4μL was considered to be a good compromise between sensitivity and matrix effect. The flow rate of the carrier was chosen as 20μL min−1 for obtaining peaks with the highest peak height within the shortest time. Based on these observations, a microflow injection (μFI) method for the direct determination of cadmium and lead in Chinese rice wine by ICP-MS using an external aqueous calibration was developed. The sample throughput was 45h−1 with the detection limit of 19.8 and 10.4ngL−1 for Cd and Pb, respectively. The contents of Cd and Pb in 10 Chinese rice wine samples were measured. The results agreed well with those determined by ICP-MS with the conventional sampling system after microwave assisted digestion. The recoveries of three Chinese rice wine samples ranged between 95.5 and 102.8%. Furthermore, the determined contents of Cd and Pb in a certified reference material of red wine (GBW 10031) and a quality control test material of wine (FAPAS T07163QC) by the proposed method were in fairly good accordance with the certified/assigned values. All results verified the accuracy of our method.

Direct determination of Cd, Cu and Pb in wines and grape juices by thermospray flame furnace atomic absorption spectrometry

Simultaneous Determination of Seven Synthetic Colorants in Wine by Dispersive Micro-Solid-phase Extraction Coupled with Reversed-Phase High-Performance Liquid Chromatography.

A Micro-Fluidic Sub-Microliter Sample Introduction System for Direct Analysis of Chinese Rice Wine by Inductively Coupled Plasma Mass Spectrometry Using External Aqueous Calibration

Determination of Trace Plumbum in Red Wine by Graphite Furnace Atomic Absorption Spectrophotometry

Effective and High-Throughput Analytical Methodology for the Determination of Lead and Cadmium in Water Samples by Disposable Pipette Extraction Coupled with High-Resolution Continuum Source Graphite Furnace Atomic Absorption Spectrometry (HR-CS GF AAS)

Direct Determination of Lead and Cadmium in Distilled Spirits by Inductively Coupled Plasma Mass Spectrometry Coupled with Chip-Based Microflow Injection System

Determination of Cr,As,Cd,Hg and Pb in various alcohol samples by inductively coupled plasma mass spectrometry

Determination of Metal Elements in Wine Using Laser-Induced Breakdown Spectroscopy (LIBS)

Analytical strategies for the measurement of different forms of Cu and Fe in wine: Comparison between approaches in relation to wine composition

Determination of Cadmium, Lead and Copper in Water Samples by Flame Atomic-Absorption Spectrometry with Preconcentration by Flow-Injection On-Line Sorbent Extraction.

[Influence of the nature of the diet on free amino acid levels in blood plasma in sheep].

Development of an alternative method to quantify H2S: application in wine fermentation

Semipreparative electrophoresis with prestained proteins.

Determination of copper in water and rice samples by flame atomic absorption spectrometry with flow-injection on-line adsorption preconcentration using a knotted reactor

Determination of Trace Amounts of Copper by Flow Injection Vapor Generation AAS

Analysis of Samples with High Dissolved Solids Content Using Flow-Injection Flame Atomic-Absorption Spectrometry

A fast, low-cost, sensitive, selective, and non-laborious method based on functionalized magnetic nanoparticles, magnetic solid-phase extraction, and fluorescent carbon dots for the fluorimetric determination of copper in wines without prior sample treatment

Determination of cadmium in biological materials by flame atomic absorption spectrometry with flow-injection on-line sorption preconcentration

High current-density anodic electro-dissolution in flow-injection systems for the determination of aluminium, copper and zinc in non-ferroalloys by flame atomic absorption spectrometry

GPR studies over the tsunami affected Karaikal beach, Tamil Nadu, south India

Nitric oxide-releasing hydrophobic polymers: preparation, characterization, and potential biomedical applications.