Abstract:InAs1-xSbx is a unique semiconductor as it possesses the lowest bandgap (Eg) of the conventional III–V materials, yielding emission out to nearly 15 μm at room temperature. As such, it is well-suited as the absorber material in long-wavelength infrared (IR) applications such as chemical sensing and large format IR imaging. However, the compositions at the longest wavelengths are significantly lattice-mismatched to conventional substrates. Overcoming this lattice-mismatch requires using thick graded buffers, and to date, little work has focused on the effect of growth conditions on the Sb-incorporation or optical quality of the longest-wavelength InAs1-xSbx materials. Here, the authors investigate the molecular beam epitaxy (MBE) growth of this potential absorber material by using solid source MBE to grow InAs1-xSbx on step-graded buffers on GaSb substrates. The authors have achieved cap-layer compositions as high as x ≈ 0.55 under various substrate temperatures (Tsub) and V/III beam equivalent pressure ratios. By using InAs1-xSbx as the grading material as well as the cap material, the authors can measure Sb-content as a function of growth conditions over many compositions. The author's results show good agreement between x and Eg compared with previous reports, obtaining T = 8 K photoluminescence (PL) emission approaching 11 μm. However, the authors also found that Sb-incorporation falls off for x > 0.2 and worsens with increasing Tsub, suggesting that Sb-incorporation rates increase with reduced adatom mobility. Additionally, the PL of the samples show improved intensity when either Tsub or V/III were increased, while cross-sectional transmission electron microscopy revealed a significant decrease in threading dislocation density with increased V/III. Ultimately, the authors found that under the proper growth conditions, optically active InAs1-xSbx with x over 0.55 can be attained, and with an optimized grading structure, could be a low-cost alternative to HgCdTe for long-wavelength infrared optoelectronics.

AlSb single-crystal grown by HPBM

Adhesion-free Bridgman growth of AlSb

Unprecedented Metallic BiS Phase from the Binary Bi–S Family Revisited under Extreme Conditions of High Pressure and High Temperature

Realization of AlSb in the Double-Layer Honeycomb Structure: A Robust Class of Two-Dimensional Material

Sb-incorporation in MBE-grown metamorphic InAsSb for long-wavelength infrared applications

On the Chemistry and Physical Properties of Flux and Floating Zone Grown SmB6 Single Crystals

Study on Epitaxial Growth of High‐Quality InSb Materials

Preparation of AlSb film by screen printing and sintering method

Cubic halide perovskites in the Cs(Pb1−xSnx)(Br3−yCly) solid solutions for crack-free Bridgman grown single crystals

The Behavior of Dopant Incorporation and Internal Strain in AlxGa1−xAs0.03Sb0.97 Grown by Molecular Beam Epitaxy

Crystal structure and thermoelectric properties of bulk polycrystalline (SbxBi1-x)2Se3 alloys

Stability and Electronic Properties of K‐Sb and Na‐Sb Binary Crystals from High‐Throughput Ab Initio Calculations

Temperature dynamic compensation vertical Bridgman method growth of high-quality GaSb single crystals

The exotically stoichiometric compounds in Al–S system under high pressure

Multimillimeter-sized cubic boron arsenide grown by chemical vapor transport via a tellurium tetraiodide transport agent

Design considerations for a long-wavelength InAsSb detector diode

Formation and characterization of an Al-rich metastable phase in Al-B phase diagram

Structure and Optical Properties of a Composite AsSb–Al0.6Ga0.4As0.97Sb0.03 Metamaterial

Impact of Substrates on the Electronic and Mechanical Properties of AlxIn1−xPySb1−y Alloys

Exploring 2D materials by high pressure synthesis: hBN, Mg-hBN, b-P, b-AsP, and GeAs

High-pressure synthesis of metastable Bi–S crystalline compounds: Crystal structure and electron transport