Abstract:We developed a new scheme for cryogen-free cooling down to sub-3 K temperature range and ultra-low vibration level. An ultra-high-vacuum cryogen-free scanning probe microscope (SPM) system was built based on the new scheme. Instead of mounting a below-decoupled cryocooler directly onto the system, the new design was realized by integrating a Gifford-McMahon cryocooler into a separate liquefying chamber, providing two-stage heat exchangers in a remote way. About 10 L of helium gas inside the gas handling system was cooled, liquefied in the liquefying chamber, and then transferred to a continuous-flow cryostat on the SPM chamber through an ∼2 m flexible helium transfer line. The exhausted helium gas from the continuous-flow cryostat was then returned to the liquefying chamber for reliquefaction. A base temperature of ∼2.84 K at the scanner sample stage and a temperature fluctuation of almost within ±0.1 mK at 4 K were achieved. The cooling curves, tunneling current noise, variable-temperature test, scanning tunneling microscopy and non-contact atomic force microscopy imaging, and first and second derivatives of I(V) spectra are characterized to verify that the performance of our cryogen-free SPM system is comparable to the bath cryostat-based low-temperature SPM system. This remote liquefaction close-cycle scheme shows conveniency to upgrade the existing bath cryostat-based SPM system, upgradeability of realizing even lower temperature down to sub-1 K range, and great compatibility of other physical environments, such as high magnetic field and optical accesses. We believe that the new scheme could also pave a way for other cryogenic applications requiring low temperature but sensitive to vibration.

Design and testing of low temperature part of an UHV SPM microscope

Advanced ice lithography system using a micro-machined Joule-Thomson cooler

Development of a cryogen-free sub-3 K low-temperature scanning probe microscope by remote liquefaction scheme

Characterization of Two Fast-Turnaround Dry Dilution Refrigerators for Scanning Probe Microscopy

Development of a near-5-Kelvin, cryogen-free, pulse-tube refrigerator-based scanning probe microscope

A Cryostat Applicable to Long-Wavelength Light-Driven Scanning Probe Microscopy.

Numerical Simulation and Experimental Verification of Dynamic Cooling and Temperature Control of the Optical Cavity in a Co2 Isotope Analyzer

Ultra-stable dry cryostat for variable temperature break junction

Design and Experimental Investigation of a Cryogenic System for Environmental Test Applications

Cryogen free spin polarized scanning tunneling microscopy and magnetic exchange force microscopy with extremely low noise

A compact ultrahigh vacuum scanning tunneling microscope with dilution refrigeration

A Cryogenic Near-Field Microscope Working At Ln Temperature

Design of a scanning gate microscope in a cryogen-free dilution refrigerator

Development of a Liquid-Helium Free Cryogenic Sample Holder with mK Temperature Control for Autonomous Electron Microscopy

Vibration isolation with high thermal conductance for a cryogen-free dilution refrigerator

Atomic-resolution cryo-STEM across continuously variable temperature

Design and performance of an ultra-high vacuum spin-polarized scanning tunneling microscope operating at 30 mK and in a vector magnetic field

Ultrahigh Vacuum Cryostat System for Extended Low-Temperature Space Environment Testing

X-ray micro-CT measurement of large parts at very low temperature

An Ultra-High Vacuum Scanning Tunneling Microscope with Pulse Tube and Joule-Thomson cooling operating at sub-pm z-noise