Abstract:We developed a new scheme for cryogen-free cooling down to sub-3 K temperature range and ultra-low vibration level. An ultra-high-vacuum cryogen-free scanning probe microscope (SPM) system was built based on the new scheme. Instead of mounting a below-decoupled cryocooler directly onto the system, the new design was realized by integrating a Gifford-McMahon cryocooler into a separate liquefying chamber, providing two-stage heat exchangers in a remote way. About 10 L of helium gas inside the gas handling system was cooled, liquefied in the liquefying chamber, and then transferred to a continuous-flow cryostat on the SPM chamber through an ∼2 m flexible helium transfer line. The exhausted helium gas from the continuous-flow cryostat was then returned to the liquefying chamber for reliquefaction. A base temperature of ∼2.84 K at the scanner sample stage and a temperature fluctuation of almost within ±0.1 mK at 4 K were achieved. The cooling curves, tunneling current noise, variable-temperature test, scanning tunneling microscopy and non-contact atomic force microscopy imaging, and first and second derivatives of I(V) spectra are characterized to verify that the performance of our cryogen-free SPM system is comparable to the bath cryostat-based low-temperature SPM system. This remote liquefaction close-cycle scheme shows conveniency to upgrade the existing bath cryostat-based SPM system, upgradeability of realizing even lower temperature down to sub-1 K range, and great compatibility of other physical environments, such as high magnetic field and optical accesses. We believe that the new scheme could also pave a way for other cryogenic applications requiring low temperature but sensitive to vibration.

A Cryostat Applicable to Long-Wavelength Light-Driven Scanning Probe Microscopy.

Advanced ice lithography system using a micro-machined Joule-Thomson cooler

Development of a cryogen-free sub-3 K low-temperature scanning probe microscope by remote liquefaction scheme

A Cryogen-Free Cryostat for Scientific Experiment in Pulsed High Magnetic Fields

A Small Liquid-Nitrogen Cryostat for Studying the Optical-Electrical Properties of Thin Films

A Cryogenic Near-Field Microscope Working At Ln Temperature

Cryogen free spin polarized scanning tunneling microscopy and magnetic exchange force microscopy with extremely low noise

A low-temperature scanning probe microscopy system with molecular beam epitaxy and optical access

Characterization of Two Fast-Turnaround Dry Dilution Refrigerators for Scanning Probe Microscopy

Cryogenic spectroscopic imaging scanning tunnelling microscope in a water-cooled magnet down to 1.7 K

An ultra-compact low temperature scanning probe microscope for magnetic fields above 30 T

Cryogen-free variable temperature scanning SQUID microscope

A Cryogen Recondensing Cooling System for Scientific Experiment in the Pulsed High Magnetic Field

Glovebox-assisted magnetic force microscope for studying air-sensitive samples in a cryogen-free magnet

The Design of Cryogen-Free Cryostat for Pulsed High Magnetic Field Based on GM Cryocooler

Cryogenic Engineering Conference and the International Cryogenic Materials Conference in 2014 , ICEC 25 – ICMC 2014 A 3 He cryostat for scientific measurements in pulsed high magnetic fields

Scanning SQUID microscopy in a cryogen-free dilution refrigerator

A High-Resolution Combined Scanning Laser- and Widefield Polarizing Microscope for Imaging at Temperatures from 4 K to 300 K

A New Cryostat for Precise Temperature Control

Development of a Liquid-Helium Free Cryogenic Sample Holder with mK Temperature Control for Autonomous Electron Microscopy